Results 1 to 10 of 15

Thread: Stamping the arch in 715 fenders

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1

    Default Stamping the arch in 715 fenders

    I know this has come up before.But has anyone SERIOUSLY looked into reproducing that lip??Or possibly roll a cut civvy fender(with some sort of mysterious body tool of course) I looked at it,doesnt seem like it should be impossible.I asked the bodyman who is doing my truck(I think he got sunburned between truck and garage he is so slo) He says a Gated Bead roller could do it if it was trimmed very accurately. just wondering

  2. #2
    Join Date
    Dec 2006
    Location
    New Jersey by Philadelphia
    Posts
    282

    Default

    My question does anyone know how to straighten out the fenders once they've been slightly dented etc. I am sure alot of old timers who worked on cars in the 1930's would know. One of my fenders has some small imperfections and I'd like some advice. I guess alot of hammer and dolly work...

  3. #3
    Join Date
    Dec 2006
    Location
    Springdale, Arkansas
    Posts
    1,431

    Default

    One of my close friends used to own a body shop in the '60's and he did come over and remove a few imperfections before I sent it off to paint. He used a small hand held torch with MAPP gas in it to heat the sheetmetal with first. And while it was still hot he just pecked at it really, not banging and clanging like I thought he should. Came out pretty nice, not perfect by no means but better than it was before.
    He especially heated some of the thick metal on the bed, glowing in a couple of deeper spots and like I said, for the most part he got the big one's down to an acceptable level.

  4. #4
    Join Date
    Jul 2007
    Location
    Rhoadesville, Virginia (five miles from no place)
    Posts
    5,125

    Default

    Are you talking about the lip in the center of the fender between the top edge and the flare? I'd think a good bodyman (not a putty guy) should be able to work it out and make it smooth again if it isn't completely wasted.

    Most sheetmetal work just takeas a LOT of patience and time, but it isn't impossible. Given that the M sheetmetal is pretty thick, it should be pretty forgiving......

  5. #5

    Default

    Quick question, can the arched flat piece (Blue arrow) of the fender be removed from the rest of the fender (Green arrow)? All the manuals show everything as one piece, I've never tried to seperate them. You just want a new outside lip on the flat fender (Blue arrow), or a whole new flat fender?

    68 M-715
    67 M-725

  6. #6

    Default

    RPG:

    if you look under the lip, you'll see how they're spot-welded together. On a lot of trucks, they do actually get seperated in the front and peeled back from the fender.

    Everyone else: I'm working on getting new fenders made, or at least getting a cost for them to be made. Some of you may know Zach Heisey, longtime FSJ-List, IFSJA, and FSJ Magazine guy. He has been providing bedsides, reproduction fenders, etc for FSJ's for a good while now and is interested in helping us out.

    So hold your breath for jsut a LITTLE longer. These fenders would have a sort of "pie-cut" flange that you'd have to bend in 90*, and make your own flare (NOT a big deal), to keep tooling costs low. This way they only have to add one die set to the stamper. So I'll see what it will take.
    **I heart Bump_r **

  7. #7

    Default

    V.P.W. used to advertise having 'rear fenders' for the 715 @85. ea Im not sure if there same size as the flares on the front fenders

  8. #8
    Join Date
    Feb 2007
    Location
    Bloomfield CT
    Posts
    313

    Default

    Spent the day yesterday drilling out spot welds to have some new flares made, if I can find a shop to put it in CAD, I will share...
    Is that real money?

Similar Threads

  1. Frame rail serial number stamping locations
    By Binford in forum Stock Tech
    Replies: 38
    Last Post: June 4th, 2013, 06:35 PM
  2. Anybody done tube fenders?
    By bluesman2a in forum Modified Tech
    Replies: 6
    Last Post: July 3rd, 2009, 04:15 PM
  3. Straightening fenders? How?
    By bluesman2a in forum Open Discussion
    Replies: 7
    Last Post: May 23rd, 2008, 10:35 AM
  4. new fenders coming?
    By tacoma in forum Open Discussion
    Replies: 23
    Last Post: January 7th, 2007, 11:41 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Site Upgrade, Design Modifications & Administrative Support by:
Palm River Enterprises LLC, IT Solutions
President: Tom King, User ID=teking
This site is owned and operated by:
M715 Zone, LLC
President: Jon Schmidt, User ID=brute4c


If you have any suggestions, comments, problems or questions, contact:  brute4c@m715zone.com
Use of this site means you understand and agree to our TERMS OF USE

Copyright Notice:
This web site is subject to the protection of the copyright laws of the United States and other countries. Except for Personal Use Only, you may not modify, copy, distribute, transmit, display, perform, reproduce, publish, license, create derivative works from, transfer, or sell any information obtained from any part of the M715 Zone website without the prior written permission of M715 Zone, LLC. Written permission can only be obtained by contacting brute4c@m715zone.com

Copyright 1998-2024