FINALLY - Reproduction Corners/B Pillar Parts

[venominjected]

Alright guys... I know there has been some "shops" remaking corners etc. on here....

But I came across this on Facebook.... Full Size Jeep (FSJ) and M715 cab corners and B-pillars are "coming soon" to KEY PARTS.

They (KEY PARTS) are a HUGE supplier of die stamping sheetmetal parts... my guess the largest and most likely the number one selling the majority of the sheetmetal in the C-10/Mustang/Camaro/Chevelle etc etc etc in the restoration industry.

This is good news for us as usually their accuracy is MUCH better than say a mom and pop shop....

While their not perfect (I've dealt with their panels on my 1966 Chevy C-10).. the panels are "decent" and come in primer already. (Sometimes lighter gauge though)

Good news if nothing else is that a larger selection is on the way. They did NOT put a formal release date on the die stamping going into production.

[ray steadward]

Thanks...Keep us posted...

[Lowcountry]

Awesome, the cab corners are what need to be replaced on the 1967 I just bought so this would help a ton. So would I pretty much just cut out the existing corners and stitch weld in these new corners? I have no welding experience so I’m just going to watch a bunch of videos on YouTube, practice a bit with some scrap metal, and hope for the best.