Page 3 of 3 FirstFirst 123
Results 21 to 25 of 25

Thread: M715 Fire Truck

  1. #21

    Default

    So I have a 360/4 speed/tcase out of a 1974 J truck that will be swapped in

    What motor mounts do I need to get? I'm fine with modifying a bit, but would like to start with something close.

    Thanks!

  2. #22

    Default

    so I'm installing a J truck engine/trans/tcase as 1 unit

    not using the stock divorced T case

    will I have driveshaft length problems?

  3. #23

    Default

    What transmission/tcase are you going to use? That will help people who did the same swap let you know what they did for drive line adjustments.
    Come and take it
    Go work at joann fabrics if you can't shoot a gun

  4. #24

    Default

    360 / T18/ D20

    I have both the J truck and the M715 driveshafts

    was hoping the rear driveshaft wouldn't be too long

    thanks

  5. #25

    Default

    changing gears....

    gonna swap in a 2002 5.3 LS and a 4l60 and keep the NP200

    does anyone have an example of what they did for Tcase lever brackets with an engine/trans swap?

    thanks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Site Upgrade, Design Modifications & Administrative Support by:
Palm River Enterprises LLC, IT Solutions
President: Tom King, User ID=teking
This site is owned and operated by:
M715 Zone, LLC
President: Jon Schmidt, User ID=brute4c


If you have any suggestions, comments, problems or questions, contact:  brute4c@m715zone.com
Use of this site means you understand and agree to our TERMS OF USE

Copyright Notice:
This web site is subject to the protection of the copyright laws of the United States and other countries. Except for Personal Use Only, you may not modify, copy, distribute, transmit, display, perform, reproduce, publish, license, create derivative works from, transfer, or sell any information obtained from any part of the M715 Zone website without the prior written permission of M715 Zone, LLC. Written permission can only be obtained by contacting brute4c@m715zone.com

Copyright 1998-2024