Results 1 to 2 of 2

Thread: Parallel/Triangulated 4 link Suspension

  1. #1

    Default Parallel/Triangulated 4 link Suspension

    Has anyone done a 4 link suspension on their truck? I'm doing a 6bt, zf6, Sterling 10.5. I bought an 04 f-350 for the rears. Originally I was just going to swap the leaf springs over. But now I'm thinking I might want to do a 4 link in the front and rear, with a cradle in the middle. Major issue I'm going to have is, I'm not a machinist nor do I know a machinist that could drawer drawl and machine everything. Just like to hear some guys input on the 4 link and hopefully get some pictures.

    Sent from my moto z4 using Tapatalk

  2. #2
    Join Date
    Jan 2004
    Location
    New Haven, CT
    Posts
    1,954

    Default

    You'll find tons of good threads on four link suspensions on https://www.pirate4x4.com/forum/16-general-4x4-discussion/, both on hardware and geometry.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Site Upgrade, Design Modifications & Administrative Support by:
Palm River Enterprises LLC, IT Solutions
President: Tom King, User ID=teking
This site is owned and operated by:
M715 Zone, LLC
President: Jon Schmidt, User ID=brute4c


If you have any suggestions, comments, problems or questions, contact:  brute4c@m715zone.com
Use of this site means you understand and agree to our TERMS OF USE

Copyright Notice:
This web site is subject to the protection of the copyright laws of the United States and other countries. Except for Personal Use Only, you may not modify, copy, distribute, transmit, display, perform, reproduce, publish, license, create derivative works from, transfer, or sell any information obtained from any part of the M715 Zone website without the prior written permission of M715 Zone, LLC. Written permission can only be obtained by contacting brute4c@m715zone.com

Copyright 1998-2024