It appears the cross reference link in the manual section is not working.
I need 2 Fed # 5330-864-5774
Ref # 11640818
It is located in illustration #77 and labeled as #29 in that picture.
Thanks,
Jeff
It appears the cross reference link in the manual section is not working.
I need 2 Fed # 5330-864-5774
Ref # 11640818
It is located in illustration #77 and labeled as #29 in that picture.
Thanks,
Jeff
HELP!!! My wheels are ready and my tires come in on Wednesday!!! I want to get the leak fixed BEFORE I put it all back together!!!!
Barrman, Brute, Binford, FNG, kwai.... someone knows.
Thanks Guys (in advance)
Jeff
The old seal will have a number on it. Take this number to a decent parts store and they will find the correct seal.
The correct number is on this site several times over but I gotta get out before I can search and my notepad with parts numbers went missing somehow. I'm sure someone will wander by with the number though.
Chris
Here we go:
Front axle: National 475384, Napa (dunno)
Rear axle: National 476282, Napa 27600
from Mozarkid
YOU ARE THE MAN!!!!!!!!!!!
I never lost the faith!!!
Thanks, I am getting REALLY excited about going for my maiden voyage!!!
Jeff
No sweat...wish I had caught it earler.
Boy am I glad you posted this thread!!! I pulled my right rear hub off and discovered everything was covered in a charred looking black greasy muck. The drum was literally dripping with gear oil. The shoes were s-o-a-k-e-d! So I pulled it all down to the part now where I need to take out the two nuts inside the hub. Was the size of the nut actually 2 1/2"? I measured as best I could with a tape measure but couldn't get a real good angle on the tape...
Before I go on here are there anymore hidden tricks to dissasembly/reassembly?
i would recomend reviewing the procedure in the manual especially for the specs and procedure for tigthening the nuts back. if you look inside the back of the seal lip there is a garter spring which keeps the seal tight on the shaft. when installing such a seal as you hit the seal with a tool the shock can sometimes pop that spring off and you may not see that an then have a leak still. so to prevent it coming off i place a dab of grease in about 3 spots in the back of the seal cavity there to keep the spring put.
Last edited by george walker; October 21st, 2007 at 06:40 PM.
68 M-715 MVPA #2710
The hub nuts are 2 9/16".
Site Upgrade, Design Modifications & Administrative Support by: Palm River Enterprises LLC, IT Solutions President: Tom King, User ID=teking |
This site is owned and operated by: M715 Zone, LLC President: Jon Schmidt, User ID=brute4c |
Copyright Notice: This web site is subject to the protection of the copyright laws of the United States and other countries. Except for Personal Use Only, you may not modify, copy, distribute, transmit, display, perform, reproduce, publish, license, create derivative works from, transfer, or sell any information obtained from any part of the M715 Zone website without the prior written permission of M715 Zone, LLC. Written permission can only be obtained by contacting brute4c@m715zone.com |