ForumsBasic TrainingOnline Maintenance ManualsThe M715 Zone Vin RegistryVPW's M715 Parts ListGalleriesLinks

Go Back   M715 Zone > General Tech > Modified Tech > PseudoZone - Mod Tech Archive

 
 
Thread Tools Display Modes
  #1  
Old December 15th, 2009, 05:10 PM
PseudoZone PseudoZone is offline
Moderator

 
Join Date: Oct 2009
Posts: 2,396
PseudoZone is a Soldier
Default texan : SBC/SM465 swap

SBC/SM465 swap
Post by texan on Nov 15, 2006, 1:52am

Looks like I'm going with the SBC/SM465 installation on my truck. I don't have any of the parts yet, so I would like some input on what parts are best in this swap. I know that this info was on the old board, but I'd like to get a fresh review before I start.

1) SBC--I'll probably go with a 4-bolt 350 that I can get in trade.

2) SM465-- Should I use a 2WD unit or 4WD? I seem to remember that a 2WD unit is preferable for the divorced t-case set up. I want to use this tranny for its economy and simplicity, as well as the availability of parts.

3)Transfer Case--From what I have read, the NP205 sounds like the best bet here. Should I go with a married set-up? Divorced? What parts will I need?

Please comment! I'd like to get a parts list together so that I can gather the pieces and get it together this winter.

Thanks,

Don
  #2  
Old December 15th, 2009, 05:10 PM
PseudoZone PseudoZone is offline
Moderator

 
Join Date: Oct 2009
Posts: 2,396
PseudoZone is a Soldier
Default tacomainoh :

Re: SBC/SM465 swap
Post by tacomainoh on Nov 15, 2006, 2:22am

Can't go wrong with the SBC. Now on to the tranny.

Either way, you're golden. Personally, I have found married setups MUCH easier to get my hands on, often really cheap. For that reason, my choice would have been a married setup, probably just grab the whole drivetrain out of a 70's GM truck.

The 205 is good for it's superior strength and utter lack of drama. It is difficult to break the 465/205 combo.

so start looking for a 70's truck, buy it cheap, rebuild the motor, and reseal the other stuff. Check the shifter for slop, and check the 3rd gear synchro's on the 465, they go bad after so many miles and need to be replaced, or you'll pop out of 3rd all the time.
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
texan : Windshield Pivot Bolts PseudoZone PseudoZone - Open Archive 1 November 12th, 2009 01:10 AM
texan : Tulsa Winch PseudoZone PseudoZone - Open Archive 5 November 10th, 2009 10:07 PM
Sm465 & Np 205 ralph Modified Tech 7 April 28th, 2008 12:35 PM
SM465 vs T98 gun512 Modified Tech 6 September 18th, 2007 09:20 PM
help! sm465 installation. bggrntrk Modified Tech Archives 15 May 4th, 2004 08:21 AM


All times are GMT -7. The time now is 02:04 AM.

 

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
1998 - 2018


This site is owned and operated by:
M715 Zone, LLC
President: Jon Schmidt, User ID=brute4c
If you have any suggestions, comments, problems or questions, contact:  brute4c@m715zone.com

Use of this site means you understand and agree to our TERMS OF USE

Copyright Notice:
This web site is subject to the protection of the copyright laws of the United States and other countries. Except for Personal Use Only, you may not modify, copy, distribute, transmit, display, perform, reproduce, publish, license, create derivative works from, transfer, or sell any information obtained from any part of the M715 Zone website without the prior written permission of M715 Zone, LLC.

Written permission can only be obtained by contacting
brute4c@m715zone.com

Copyright 1998-2018