Page 1 of 2 12 LastLast
Results 1 to 10 of 14

Thread: NAPA part numbers for front and rear wheel bearings?

  1. #1

    Default NAPA part numbers for front and rear wheel bearings?

    Anyone know the NAPA part number for the correct wheel bearings? My -725 is in the shop to get some brake work done to it, and while the wheel seals are being replaced, in case the mechanic sees the original bearings are crap, I'd like to pop on down to NAPA and get the bearings for him. Thanks,

  2. #2
    Join Date
    Dec 2003
    Location
    Giddings, Texas
    Posts
    7,729

    Default

    It will be a lot cheaper to get them from AB Linn.
    Remember if you didn't build it you can't call it yours.

    6.2 powered M715, 5 M1009's, M416, 2 M101's, 2 M105's, 3 M35's, M1007 6.5 turbo Suburban project called Cowdog.

    https://www.youtube.com/channel/UCCz...HGkBCfhXZ5iuaw

  3. #3

    Default

    Yes, I agree. But if the mechanic says it needs them, I can walk nextdoor and order them next day from NAPA. I am only buying them if the guys needs them, but if he does, I will need them right away.

  4. #4
    Join Date
    Dec 2003
    Location
    Giddings, Texas
    Posts
    7,729

    Default

    I just looked through the manuals and couldn't find it. I know it was listed there at one time. Jon should be along soon and he will know where it went.
    Remember if you didn't build it you can't call it yours.

    6.2 powered M715, 5 M1009's, M416, 2 M101's, 2 M105's, 3 M35's, M1007 6.5 turbo Suburban project called Cowdog.

    https://www.youtube.com/channel/UCCz...HGkBCfhXZ5iuaw

  5. #5
    Join Date
    Dec 2003
    Location
    SF Bay Area, CA
    Posts
    499

    Default

    From previous posts:

    The rear wheel bearing p/n's are as follows. Timkin brg's inner cone is 469, inner cup 453X (not positive), outer cone is 368A, and I don't know the outer cup. The rear wheel bearing seal is National p/n 416282 (size 2.750 x 4.249 x .468 double lip seal) which replaced National p/n 476282-X54. There is no seal between the differential and the wheel brg's so expect to have gear oil lubing the whl brg's.
    Robert

    Wheel Bearings, Rear
    The information I have for the rear is for the bearings only. I don't have the cup numbers. Outer bearing is Timken #368A with a 2.000" bore rated at 4600 lbs.
    Inner bearing is Timken #469 with a 2.250" bore rated at 7300 lbs.The seal is a NAPA #27601. If someone has the Timken cup numbers I will add this to my
    book.
    from ed drake 18 jul 01

  6. #6
    Join Date
    Dec 2003
    Location
    SF Bay Area, CA
    Posts
    499

    Default

    From Brut4c's parts info:

    Wheel Bearings, Front
    The seals that I used for the rear,Napa#27601 The front seal # is Napa#28474 ...Leme see...The front
    bearing(outer)is Napa#BR18720....
    from Cutworm 68 #4621 10/28/99
    Outer-Timken #18790 Rated @2950 lbs.
    Cup #18720
    Inner-Timken #387A Rated @4900 lbs.
    Cup #382A
    from Ed Drake 16 feb 01

  7. #7
    Join Date
    Dec 2003
    Location
    Lone Pine, CA
    Posts
    451

    Default

    The numbers are on the bearings. Your mechanic will know exactly what to get if needed.

    Chris

  8. #8
    Join Date
    Jan 2004
    Location
    Northern Colorado
    Posts
    324

    Default

    I bought the front wheel bearing seal from NAPA for about $50. Someone here said that AB Linn had it for under $10, IIRC.

    I bet his bearings are much cheaper, too.

  9. #9
    Join Date
    Sep 1998
    Location
    North Central Wisconsin
    Posts
    11,520

    Default

    I hve nothing further to add than whats been said...I would have to tear into mine to get more info...

  10. #10
    Join Date
    Jul 2007
    Location
    Rhoadesville, Virginia (five miles from no place)
    Posts
    5,125

    Default

    The bearing and race will have a number on them that can either be used as is or crossed into another manufacturer.........

    Typically, the bearing number starts with an LM

Similar Threads

  1. New NAPA part Numbers - Master Swap
    By rboltz in forum Modified Tech
    Replies: 11
    Last Post: September 13th, 2010, 08:57 PM
  2. rjenkins : Front and rear shock part numbers
    By PseudoZone in forum PseudoZone - Open Archive
    Replies: 5
    Last Post: November 11th, 2009, 02:23 AM
  3. rear wheel bearings
    By terryb in forum Stock Tech
    Replies: 2
    Last Post: March 6th, 2007, 07:20 AM
  4. NAPA brake part numbers
    By Archiver in forum Open Discussion Archives
    Replies: 0
    Last Post: December 24th, 2006, 04:44 PM
  5. NAPA brake part numbers
    By Archiver in forum Open Discussion Archives
    Replies: 0
    Last Post: November 3rd, 2006, 10:11 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Site Upgrade, Design Modifications & Administrative Support by:
Palm River Enterprises LLC, IT Solutions
President: Tom King, User ID=teking
This site is owned and operated by:
M715 Zone, LLC
President: Jon Schmidt, User ID=brute4c


If you have any suggestions, comments, problems or questions, contact:  brute4c@m715zone.com
Use of this site means you understand and agree to our TERMS OF USE

Copyright Notice:
This web site is subject to the protection of the copyright laws of the United States and other countries. Except for Personal Use Only, you may not modify, copy, distribute, transmit, display, perform, reproduce, publish, license, create derivative works from, transfer, or sell any information obtained from any part of the M715 Zone website without the prior written permission of M715 Zone, LLC. Written permission can only be obtained by contacting brute4c@m715zone.com

Copyright 1998-2024