Results 1 to 3 of 3

Thread: 10k garwood winch from rear PTO 205?

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1

    Default 10k garwood winch from rear PTO 205?

    Is it possible (keeping in mind I'm hard headded and have lots of tools) to mount a 10k Garwood in front and run it from an attached np205 that has a rear facing PTO?

    I'm not familiar w/any PTO winch setups and would appreciate any pics/diagrams (or links to them) to help me figure out what I'd need to make this happen.

    Thanks gents!
    Britt
    FL^

  2. #2
    Join Date
    Dec 2003
    Location
    Giddings, Texas
    Posts
    7,729

    Default

    There was a former member that had 10K garwoods at both ends of his M715. A different pto to run each though.

    All you need is a shaft that turns to power the winch. A rear facing pto could be made to work with triple row chain and sprockets to get the power going to the front.
    Remember if you didn't build it you can't call it yours.

    6.2 powered M715, 5 M1009's, M416, 2 M101's, 2 M105's, 3 M35's, M1007 6.5 turbo Suburban project called Cowdog.

    https://www.youtube.com/channel/UCCz...HGkBCfhXZ5iuaw

  3. #3

    Default

    most pto outputs can be swapped from front to back facing. Running a front mounted winch from a rear facing pto isn't impossible, just lots more engineering than you should have to do. I will call you in a little bit. Snakeater
    COWBELL, you need more of it

Similar Threads

  1. jeepcj : Rear mount pto winch
    By PseudoZone in forum PseudoZone - Open Archive
    Replies: 7
    Last Post: November 12th, 2009, 12:50 AM
  2. rear winch
    By M715AKACHARLIE in forum Modified Tech
    Replies: 12
    Last Post: March 11th, 2009, 02:27 PM
  3. Garwood winch
    By 646dan in forum Modified Tech
    Replies: 3
    Last Post: February 27th, 2008, 11:33 PM
  4. Rear Winch Install w/ Pics
    By Jay Dog in forum Modified Tech
    Replies: 3
    Last Post: August 4th, 2007, 12:48 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Site Upgrade, Design Modifications & Administrative Support by:
Palm River Enterprises LLC, IT Solutions
President: Tom King, User ID=teking
This site is owned and operated by:
M715 Zone, LLC
President: Jon Schmidt, User ID=brute4c


If you have any suggestions, comments, problems or questions, contact:  brute4c@m715zone.com
Use of this site means you understand and agree to our TERMS OF USE

Copyright Notice:
This web site is subject to the protection of the copyright laws of the United States and other countries. Except for Personal Use Only, you may not modify, copy, distribute, transmit, display, perform, reproduce, publish, license, create derivative works from, transfer, or sell any information obtained from any part of the M715 Zone website without the prior written permission of M715 Zone, LLC. Written permission can only be obtained by contacting brute4c@m715zone.com

Copyright 1998-2024