The bracket that mounts to the hood. I have a BO Light but not the correct 715 brackets.
The bracket that mounts to the hood. I have a BO Light but not the correct 715 brackets.
This might be a bit more helpful, reposted from the temp site:
Heres the best specs I can give....
The plate is 4 inches wide from end to end and is 1/16th inch thick.
I made a side view drawing of the plate by tracing the spare plate I have:
Dimensions:
A= 3/4 inch
B= 5/8ths inch
C= 4 inches
D= 1 13/16ths inch
E= 7/8ths inch
Top view, simple, just trying to show the bolt spacing and hole sizes...
The holes on the edges, on the flanges in the first drawing, are 9/32nds inch diameter.
The hole centers on the short edge of the first image, section A, are 3/8ths inch in from the long side edge. Each of the 2 holes in that end are 1/2 inch on center in from the short side edge, there are 3 inches center to center of the 2 holes.
The hole centers on the long edge of the first image, section E, are 7/16ths inch from the long side edge. As with the other end, each of the 2 holes in that end are 1/2 inch on center in from the short side edge, there are 3 inches center to center of the 2 holes.
The large flat top area has 3 holes as seen in the 2nd image, section C. The holes are all 1/2 inch on center from the side edges of the plate. The 2 holes on the upper part of the 2nd drawing...the one on the left, toward the short flange side, is 9/16ths inch on center from the edge...the one on the right is 11/16ths inch on center from the opposite edge. The 2 are 2 3/4 inches on center from each other. The single hole on the other side is 2 inches on center from each edge...dead center of that 4 inch section.
If anyone needs more info, just ask.
I have a few extra without the holes yet. They match perfectly to a NOS bracket Jon lent me. They do not match perfectly to the original on one of my trucks. I've sent one or two to members here for 5$ plus shipping but no report about how they fit. I also had another member I was supposed to send one to but have long forgotten who it was for the life of me. If interested, send me a PM
do you still have a extra one, when I bought my truck the previous owner had a lot of "extras" bagged. my b/o was there missing the plate. If you do just private message payment info. thanks
Site Upgrade, Design Modifications & Administrative Support by: Palm River Enterprises LLC, IT Solutions President: Tom King, User ID=teking |
This site is owned and operated by: M715 Zone, LLC President: Jon Schmidt, User ID=brute4c |
Copyright Notice: This web site is subject to the protection of the copyright laws of the United States and other countries. Except for Personal Use Only, you may not modify, copy, distribute, transmit, display, perform, reproduce, publish, license, create derivative works from, transfer, or sell any information obtained from any part of the M715 Zone website without the prior written permission of M715 Zone, LLC. Written permission can only be obtained by contacting brute4c@m715zone.com |