Results 1 to 9 of 9

Thread: Front Axle Bearing and Seal part numbers needed

  1. #1

    Default Front Axle Bearing and Seal part numbers needed

    Hello fellow Zoners,
    This has prabably been covered a million times but I cant find them!
    I need a list of the part numbers for the bearings, races and seals to rebuild the knuckles on my stock M715. I was doing the brakes and they are rough.
    Are they available from NAPA?
    Can anyone help?
    Thanks!
    Mike
    mike@weldedparts.com
    BlessedM715

    John 15:13
    Greater love has no one than this, That he lay down his life for his friends...

  2. #2
    Join Date
    Sep 1998
    Location
    North Central Wisconsin
    Posts
    11,520

    Default

    This is from the archives:

    Inner Bearing Oil/Grease Seal (National # 475384 x 54); 2.)

    Complete Knuckle Gasket/Seal Kit (Spicer #706230X) which includes 12 x rear oil seal bolts, 2 x outer metal seal, felt gasket, rubber seal, and metal ring seal.

    Axle seal, front axle: Napa#28474

    Front Bearings:
    Outer-Timken #18790 Rated @2950 lbs.
    Cup #18720
    Inner-Timken #387A Rated @4900 lbs.
    Cup #382A

    Hub Seal, Front: Seal-"CR" #28175 or NAPA #28474 or National #475384-X54



    Thats all I have.
    Lord send your Holy Ghost into our hearts and make the desire of our hearts Your Will.

    Pro-choice, that's a LIE, babies don't choose to die!!

  3. #3

    Default

    Thanks Jon!
    As Always you are the best!!
    God Bless...
    Mike
    BlessedM715

    John 15:13
    Greater love has no one than this, That he lay down his life for his friends...

  4. #4
    Join Date
    Sep 1998
    Location
    North Central Wisconsin
    Posts
    11,520

    Default

    You are welcome...and remember, God is the best...we just try to imitate Him!
    Lord send your Holy Ghost into our hearts and make the desire of our hearts Your Will.

    Pro-choice, that's a LIE, babies don't choose to die!!

  5. #5
    Join Date
    Jul 2009
    Location
    Louisville, KY
    Posts
    1,041

    Default

    I just looked up NAPA #28474...$82.40, WOW!
    Thanks for all the help!

  6. #6
    Join Date
    Jan 2011
    Location
    Fernandina Beach, FL
    Posts
    3,689

    Default

    I just looked on Amazon. (I got all of my seals for very good prices for the Braden LU-4 winch) $295.89! What the heck???!!!

  7. #7

    Default

    Now that the 706230X Knuckle Seal Kit is obsolete, the price has jacked up on just about anything you can find.
    Here is one alternative that I know of:

    https://torqueking.com/product/4936/...0-front-axles/
    Torque King 4x4 - Qa4936 12 Bolt Knuckle Ball Seal Kit For Dana 44hd, 60, 70 Front Axles - $120 per side

    You can buy Pieces of the 706230X kit, but not the entire kit here:
    http://www.northerndrivetrain.com/pr...I-706230X.html
    Last edited by Testa Rossa; February 8th, 2020 at 11:47 PM.

  8. #8
    Join Date
    Sep 2014
    Location
    Wichita Falls, TX
    Posts
    603

    Default

    Yeah, those seals are outrageous.

    I "rebuilt" mine with some vinyl upholstery I had in the shop. 2 layers I think. And I've read on here about people using leather.
    I did that 4 or 5 years ago, holding up good.

  9. #9

    Default

    We used to use oil-resistant rubber sheet for various purposes in the oilfield. 1/4" thick, IIRC. I bet that stuff about 1/8" thick would work for this application.

Similar Threads

  1. rjenkins : Front and rear shock part numbers
    By PseudoZone in forum PseudoZone - Open Archive
    Replies: 5
    Last Post: November 11th, 2009, 02:23 AM
  2. Pilot bearing needed
    By sermis in forum Modified Tech
    Replies: 3
    Last Post: March 20th, 2009, 10:51 AM
  3. NAPA part numbers for front and rear wheel bearings?
    By maddawg308 in forum Open Discussion
    Replies: 13
    Last Post: January 5th, 2008, 11:33 AM
  4. Front axle trouble- bearing nut tool?
    By azNuke_M715Aggie in forum Open Discussion Archives
    Replies: 11
    Last Post: March 23rd, 2004, 02:54 AM
  5. Part number for windshield seal?
    By monoshock in forum Open Discussion Archives
    Replies: 7
    Last Post: February 8th, 2004, 09:45 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Site Upgrade, Design Modifications & Administrative Support by:
Palm River Enterprises LLC, IT Solutions
President: Tom King, User ID=teking
This site is owned and operated by:
M715 Zone, LLC
President: Jon Schmidt, User ID=brute4c


If you have any suggestions, comments, problems or questions, contact:  brute4c@m715zone.com
Use of this site means you understand and agree to our TERMS OF USE

Copyright Notice:
This web site is subject to the protection of the copyright laws of the United States and other countries. Except for Personal Use Only, you may not modify, copy, distribute, transmit, display, perform, reproduce, publish, license, create derivative works from, transfer, or sell any information obtained from any part of the M715 Zone website without the prior written permission of M715 Zone, LLC. Written permission can only be obtained by contacting brute4c@m715zone.com

Copyright 1998-2024