Results 1 to 2 of 2

Thread: 4x4jeepfeak : 35 Spline Axle Shafts in Stock Axles

  1. #1

    Default 4x4jeepfeak : 35 Spline Axle Shafts in Stock Axles

    35 Spline Axle Shafts in Stock Axles
    Post by 4x4jeepfeak on Jun 22, 2006, 11:18pm

    I know on the old board there was a post about putting larger axle shafts in a stock frount axle. Did this get post or is it hiding some where?

    Thanks Tom

  2. #2

    Default bigwheelbob :

    Re: 35 Spline Axle Shafts in Stock Axles
    Post by bigwheelbob on Jun 23, 2006, 7:42am

    Try this for the info, i have done it , it works fine. However you still have the weak housing. You have to do something about making the long tube stay in the housing. I seen another break one last sat. night at the mud pit here.
    http://www.m715zone.com/vb/view.php?pg=35_spline

    (brute4c edit to make the url a link)
    Last edited by brute4c; September 6th, 2014 at 06:06 PM. Reason: updated link

Similar Threads

  1. Axles that can be swapped in place of the stock axles
    By Swampthang in forum Modified Tech
    Replies: 129
    Last Post: December 1st, 2021, 08:24 PM
  2. Axle Shafts
    By bor in forum Open Discussion
    Replies: 7
    Last Post: October 8th, 2008, 06:23 PM
  3. front axle shafts grease.....
    By BCOWANWHEELS in forum Stock Tech
    Replies: 15
    Last Post: August 30th, 2007, 07:21 PM
  4. How to convert the front Dana 60 to 35 spline axles
    By brute4c in forum Modified Tech Archives
    Replies: 8
    Last Post: March 15th, 2004, 10:45 AM
  5. Custom axle shafts...
    By mmth715@mac.com in forum Modified Tech Archives
    Replies: 28
    Last Post: February 11th, 2004, 12:05 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Site Upgrade, Design Modifications & Administrative Support by:
Palm River Enterprises LLC, IT Solutions
President: Tom King, User ID=teking
This site is owned and operated by:
M715 Zone, LLC
President: Jon Schmidt, User ID=brute4c


If you have any suggestions, comments, problems or questions, contact:  brute4c@m715zone.com
Use of this site means you understand and agree to our TERMS OF USE

Copyright Notice:
This web site is subject to the protection of the copyright laws of the United States and other countries. Except for Personal Use Only, you may not modify, copy, distribute, transmit, display, perform, reproduce, publish, license, create derivative works from, transfer, or sell any information obtained from any part of the M715 Zone website without the prior written permission of M715 Zone, LLC. Written permission can only be obtained by contacting brute4c@m715zone.com

Copyright 1998-2024