Results 1 to 3 of 3

Thread: NP200 output shaft questions

  1. #1
    Join Date
    Oct 2016
    Location
    Dracut, Massachusetts
    Posts
    232

    Default NP200 output shaft questions

    I have a couple questions regarding the stock NP200. I had resealed the one input and three outputs a few years back, but when I finally got it on the road the I realized the output for the parking brake is leaking still. I pull it apart and reseal again, but this time realize there is a groove in the shaft. So I find a NOS one (well I thought I did), but it turns out that that output is slightly different from the others and difficult to find.

    Question 1: How well do the Redi-Sleeves work and what is the part number. I’ve researched and gotten some conflicting info on the part number
    Question 2: When driving in new seals, is SOP to drive them all the way into the boring so it bottoms out, or drive them until they are flush with the boring.

    Any advice/help would be greatly appreciated. Thanks

  2. #2
    Join Date
    Jun 2014
    Location
    Eastern Maine
    Posts
    377

    Default

    This is the best price I found on the sleeve, I did all 4.
    https://www.ebay.com/itm/Lincoln-SA-...72.m2749.l2649

    I drove the seal in flush with the outside of the bore like the original was. The parking brake flange was a little tricky as the sleeve had to be pushed on beyond the end, take careful measurements where the wear groove is so your sleeve is centered on that groove.
    Last edited by m38inmaine; August 14th, 2020 at 04:13 PM.

  3. #3
    Join Date
    Oct 2016
    Location
    Dracut, Massachusetts
    Posts
    232

    Default

    Thanks for the info.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Site Upgrade, Design Modifications & Administrative Support by:
Palm River Enterprises LLC, IT Solutions
President: Tom King, User ID=teking
This site is owned and operated by:
M715 Zone, LLC
President: Jon Schmidt, User ID=brute4c


If you have any suggestions, comments, problems or questions, contact:  brute4c@m715zone.com
Use of this site means you understand and agree to our TERMS OF USE

Copyright Notice:
This web site is subject to the protection of the copyright laws of the United States and other countries. Except for Personal Use Only, you may not modify, copy, distribute, transmit, display, perform, reproduce, publish, license, create derivative works from, transfer, or sell any information obtained from any part of the M715 Zone website without the prior written permission of M715 Zone, LLC. Written permission can only be obtained by contacting brute4c@m715zone.com

Copyright 1998-2024