Page 1 of 2 12 LastLast
Results 1 to 10 of 13

Thread: Next mod to the 715......

  1. #1
    Join Date
    Jul 2007
    Location
    Rhoadesville, Virginia (five miles from no place)
    Posts
    5,125

    Default Next mod to the 715......

    Picked up this baby over the weekend, so soon I'll not have to worry about the noise and burning smell from under the 715:





    Pics of the mods to come soon...........
    "Free advice is worth what you pay for it."™

  2. #2

    Default

    Looks like something that used to be under an International. I have one that I am in the process of putting under my 715 too. I have modified the shift rails for twin stick capabilities and am trying to use the stock crossmembers with some modifications to it.

  3. #3

    Default

    PTO boltup to rear winch on xmas list?

  4. #4
    Join Date
    Jul 2007
    Location
    Rhoadesville, Virginia (five miles from no place)
    Posts
    5,125

    Default

    May be an option......or that dump bed.
    "Free advice is worth what you pay for it."™

  5. #5

    Default

    What model is that?
    Zone holster maker

  6. #6

    Default

    Who built that, using a torch for drilling holes? Looks not very professional!
    Wolf

  7. #7
    Join Date
    Jul 2007
    Location
    Rhoadesville, Virginia (five miles from no place)
    Posts
    5,125

    Default

    Quote Originally Posted by k8icu View Post
    What model is that?
    Its an NP205. Not sure exactly what it is out of.
    "Free advice is worth what you pay for it."™

  8. #8
    Join Date
    Jul 2007
    Location
    Rhoadesville, Virginia (five miles from no place)
    Posts
    5,125

    Default

    Quote Originally Posted by wolf.dose View Post
    Who built that, using a torch for drilling holes? Looks not very professional!
    Wolf
    Thanks for yet another inappropriate post there Wolfy........The crossmember was removed by using a torch to cut the rivets off of the donor frame.
    "Free advice is worth what you pay for it."™

  9. #9

    Default

    Randy If you do put a PTO on your NP205 will the gas tank be in the way? Looks kind of close. Huuuuumm ?

  10. #10

    Default

    looks familiar, I started unbolting my M211 case to put in the 1.5 ton chevy case last weekend

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Site Upgrade, Design Modifications & Administrative Support by:
Palm River Enterprises LLC, IT Solutions
President: Tom King, User ID=teking
This site is owned and operated by:
M715 Zone, LLC
President: Jon Schmidt, User ID=brute4c


If you have any suggestions, comments, problems or questions, contact:  brute4c@m715zone.com
Use of this site means you understand and agree to our TERMS OF USE

Copyright Notice:
This web site is subject to the protection of the copyright laws of the United States and other countries. Except for Personal Use Only, you may not modify, copy, distribute, transmit, display, perform, reproduce, publish, license, create derivative works from, transfer, or sell any information obtained from any part of the M715 Zone website without the prior written permission of M715 Zone, LLC. Written permission can only be obtained by contacting brute4c@m715zone.com

Copyright 1998-2024