The numbers are on the bearings. Your mechanic will know exactly what to get if needed.
Chris
The numbers are on the bearings. Your mechanic will know exactly what to get if needed.
Chris
I bought the front wheel bearing seal from NAPA for about $50. Someone here said that AB Linn had it for under $10, IIRC.
I bet his bearings are much cheaper, too.
I hve nothing further to add than whats been said...I would have to tear into mine to get more info...
The bearing and race will have a number on them that can either be used as is or crossed into another manufacturer.........
Typically, the bearing number starts with an LM
Wow. Was anybody else confused by the above replies?
I just pulled the hubs from a customer's M715 and here are the orig part #'s. The bearings AND seals were the same for front and rear, contrary to the parts manual and to some of the above posts.
Inner wheel bearing:
387A Cone/Roller (Timken)
382A Cup (Timken)
Outer wheel bearing:
18790 Cone/Roller (Timken)
18720 Cup (Timken)
Wheel seal:
475384X54 (National)
A set of bearings and seals should run around $60 per wheel. Don't buy them at your local parts store. They'll charge you at least twice the going rate. Find a bearing distributor or order from an online warehouse.
Tony Casey
BULLGEARInc.com
Great info...direct and to the point.
A great big WHOOPS!!! I wish I could edit my previous post to save myself some embarrassment. Seems I stayed in the shop too late last night and had my parts piles mixed up. The fronts and rears ARE different. Mods, please delete my previous post. Thanks.
Here are the orig part #'s for the wheel bearings and seals.
Front:
475384X54 Seal
Inner Bearing:
387A Cone/Roller
382A Cup
Outer Bearing:
18790 Cone/Roller
18720 Cup
Rear:
476282X54 Seal
Inner Bearing:
469 Cone/Roller
453X Cup
Outer Bearing:
368A Cone/Roller
362A Cup
Expect to pay around $60 for the front set and $75 for the rear set at a bearing distributor or online parts house. You'll pay at least twice that at your corner parts store. AB Linn will probably cut you an even better deal if he has them.
Tony Casey
BULLGEARInc.com
Site Upgrade, Design Modifications & Administrative Support by: Palm River Enterprises LLC, IT Solutions President: Tom King, User ID=teking |
This site is owned and operated by: M715 Zone, LLC President: Jon Schmidt, User ID=brute4c |
Copyright Notice: This web site is subject to the protection of the copyright laws of the United States and other countries. Except for Personal Use Only, you may not modify, copy, distribute, transmit, display, perform, reproduce, publish, license, create derivative works from, transfer, or sell any information obtained from any part of the M715 Zone website without the prior written permission of M715 Zone, LLC. Written permission can only be obtained by contacting brute4c@m715zone.com |
![]() |