I finally got moved into the new shop and making forward progress again!

I pulled the front axle housing and got the Dana Tru-Trac diff with 4:88 gears installed. Swapped the outer stub axles for 35 spline units while installing new u-joints, put Yukon locking hubs on it, high steer arms with tie rod and loaded re-man calipers with new brake pads on new rotors...
Installed a heavy duty, fabricated diff cover and painted.
I've still got to put new bushings in the springs and I'm going to remove 1 or 2 leaves from the spring pack before installing it.

Sent from my SAMSUNG-SM-G890A using Tapatalk