[quote="65CJ5"]
Quote Originally Posted by tomelgato
Tom, on mine I have 12" blades and 10" arms. About the last 1" of the arms have a slight upward bend to them. I'm not sure what the sweep angle is set to as I have not had the motors open, but you can adjust that later if needed.

Stan
Thanks a lot steve!
Something else: these motors are available with 3 different shaft lengths: 1 1/2, 2 1/2 & 3 1/2 inch, which should fit best?

Ahh, something else:
If you have running the wipers for a while, how good does ist work (and how funny does it look) to have a system with 2 motors instead of the usual one motor/linkage/2 wiper systems like on a fsj. Imho they dont run on the same speed over long time.
...asking stupid because i never used my m715 wipers

I was also wondering if its possible to adopt a CJ style system, but i think theres not enough space for the linkage.

btw. i had this type of wiper motor (a bosch unit) on one of my cars where the linkage and shafts where so badly seized that at the end the wipers didnt move at all (i was wondering for about 1/2 a year why the wipers are sooo slow). The motor survived this without any damage!

Tom