Re: Plug Wire Problem
Post by brute4c on Nov 8, 2006, 9:32pm

The factory location for the hot water out of the engine to the heater is from the outlet between cylinders 5 and 6 on the head....they used this piece to keep the hose away from the exhaust:



Obviously an old one but nonetheless thats the idea...the stock heater kit in the manuals shows the same thing.
I measured 5 ? inches from the threaded end to the start of the bend...to the back side of the pipe at the bend is 6 ? inches.


The plug wires measure as follows from shortest to longest, all in inches:

21 ?
23 ?
25 ?
27
32 ?
34 ?


Hope that helps....let me know if more is needed!!