Re: Vette Master Cylinder
Post by barrman on Dec 23, 2006, 9:29pm

There are two ways to "bench bleed" a master cylinder. Both include filling it full of fluid. If your mc came with the little plastic fittings and the little plastic hoses, hold them in the top and gently push until no more bubbles appear.

If your mc comes with the little plastic plugs. Put them in. Just push real easy until no more bubbles come up or until your assistant yells that fluid is coming out of the plastic plugs.

I like to do either way in the truck with the mc bolted in. Less chances to spill all the fluid on your fenders.