Re: Fuel tank sending unit
Post by brute4c on Dec 14, 2006, 3:44pm

Funny you mention that....

I took my tank out and had it rhino lined a couple years ago..of course it was DRY when I put it back in...with a new gaugeand sending unit on 12 volt....I used one that I have to adjust to fit and I got it pretty good...as good as it would allow....it doesnt quite touch the top of the tank or the bottom...but not by much....the gauge I put in is digital.

To check where the gauge started to read, I filled a 1 gallon container from a 5 gallon gas can and started slowly pouring in....it ended up that as I neared the end of the 5 gallons, the gauge finally moved off 0% to 1%....