Re: Windshield Removal
Post by 40grit on Oct 7, 2006, 2:41pm

Howdy Kurt,
I took mine apart not too long ago...
first pry out the little rubber lock lip, it should be in the middle of the rubber on the outside ( at least that's where it was on mine), it'll look like a little line about halfway in from the outer edge all the way around. I used a small screwdriver to "unlock" the lip, it comes undone which allows the rubber to move around a little, then take some tonguedepressors or some screwdrivers and carefully pry all the rubber away from the frame on both sides. you kinda squish the rubber and try and get the outer edge and the inner edge closer together..it'll spring back, but it gives you a little more room. Then carefully pry two upper corners out one side of the frame and slowly move the screwdriver/tonguedressors around the perimeter. this should push the glass slowly out one side.
I got mine out with out breaking it. I can get some pics to help explain this better in Monday...