Re: wheel cylinders
Post by brute4c on Oct 2, 2006, 10:02am

Rich,
I use those same wheel cylinders...one of these days I am gonna do another set and do a writeup...but its easy...heres the skinny...

When you take out the 2 mount bolts from the old ones, those 2 holes need to be enlarged only on the bottom part of the hole...the hole needs to move downward about 1/4 ot 1/3 of the hole size so the new ones can bolt on...left and right are fine.

I used a rat tail file...took about 20 minutes...you can use a die grinder or a bunch of other tools too...

I did put a wider washer on the bolt just because...