Here’s the radiator I got. I drilled new holes in the truck radiator support to mount it, and I also cut out the angle braces off the frame to make it sit lower. I don’t have the hood on right now, but I took a few measurements and it seemed like it would sit too high using the factory holes. I cut some 1/4 rubber and used that as isolator pads between the radiator flange and rad support. It’s a nice piece, the only thing I’m unhappy with is the lower inlet it 1-1/2”. I would have liked 1-3/4” to match my water pump but I have a hose coming to make it work.

https://www.summitracing.com/parts/sum-380483

Yup, I put 3 courtesy lights under the dash. I plan to put in a door switch, likely only on the drivers side to save some headaches. They’re just clear 1” trailer marker lights that I got from Princess Auto!


Sent from my iPhone using Tapatalk