Picture test, Windshield Bumbers

[Don Cavey]

I want to do a test to see if I can attach pictures. So, rather than upload some garbage pictures, I will revisit the "BUMPER ASSEMBLY, WINDSHIELD, RIGHT" rebuild. I got new welting from an eBay seller many years ago. It came with the proper welting and some rivets. They were brass color but must be steel because they rusted! But they still work.

Here is how they went on. You rivet the welting through the original holes and trim the welting to size. In the last picture, I used a piece of pipe to buck the rivet head whilst mashing the split part over in the fourth picture. The final picture is the finished project. It was actually rather easy.

Thanks for taking the time to view this post.