Results 1 to 8 of 8

Thread: custom engine swap harnesses - hemi, cummins, et. al.

  1. #1

    Default custom engine swap harnesses - hemi, cummins, et. al.

    another lead from the Jeep show this weekend that i picked up was a guy who does CUSTOM wiring harnesses. his current ones are centered around the 5.7/6.1 Hemi's... but I did talk to him about a cummins' harness (both 4bbt and 6bbt)... as well as a custom body/cab harness in both 12v and 24v.

    not sure on cost yet... and what he would need from "us" would be a detailed wiring diagram as well as dimensions of the truck for lengths of wire.


    oh yeah... and i talked to a guy that does custom dash's too. hahaha. it was a busty weekend

  2. #2
    Join Date
    Jul 2007
    Location
    Rhoadesville, Virginia (five miles from no place)
    Posts
    5,125

    Default

    Quote Originally Posted by pamuddyjeep View Post


    it was a busty weekend
    That's never a bad thing....how did you concentrate on the Jeeps though?
    "Free advice is worth what you pay for it."™

  3. #3

    Default All breeds Jeep show

    You went to the York town show and did not come over to the United Four Wheel Drive both and say hello?

  4. #4

    Default

    Quote Originally Posted by randyscycle View Post
    That's never a bad thing....how did you concentrate on the Jeeps though?
    hahaha... typo's.

    Quote Originally Posted by jeepcj View Post
    You went to the York town show and did not come over to the United Four Wheel Drive both and say hello?
    I had my own booth to run. And if I wasn't there I was out pressing flesh or drooling over that M725 - and the only reason I got to talk to them is because they have a team in the one rock-crawl series I am shooting pictures for.

    Didn't even know you guys were there. Had I known I would have stopped by

  5. #5

    Default

    Wow, talk about a thread from the past.

    Just realized you guys were talking about me and the rest of the PRR crew. I don't remember talking to anyone there about doing harnesses though, granted we had several people working the booth that year.

    Not really in the business to 'sell' harnesses anymore, but if someone needs a hand getting a late model engine running in an old truck feel free to bug me.

    At this point I've done 2 buggies with late model Chevy stuff in them and the 5.7 in the 725.

    Cummins, well pre 24 valve, should be stupid simple to get running.

    newer Chrysler CANBus stuff, well that takes a little more creativity.

    Jason

  6. #6
    Join Date
    Aug 2007
    Location
    Aurora, CO
    Posts
    334

    Default

    Yeah the 12 valve ve pump Cummins only require 12v to a fuel solenoid, same for p7100 pump 12 valve. The 24 valves can be ran with three 12v ignition on wires.

    Now common rails...... thats where pre made harnesses are needed. Good info especially since the 5.7 hemi's are becomming readily available for swaps

  7. #7

    Default

    Quote Originally Posted by tndonor View Post
    Yeah the 12 valve ve pump Cummins only require 12v to a fuel solenoid, same for p7100 pump 12 valve. The 24 valves can be ran with three 12v ignition on wires.

    Now common rails...... thats where pre made harnesses are needed. Good info especially since the 5.7 hemi's are becomming readily available for swaps
    One of my current goals on the 5.7 is to find a way to eliminate the Front Control module in swaps that have the 545 RFE in them. The Auto tranny won't shift unless the ECU knows the vehicle speed. The vehicle speed is sent over the can bus from the Front Control Module after it talks to the ABS module and sensors.

    Currently looking at building a box that will take about any speed sensor and get that information onto the can bus to get the engine happy again. Once I have a box on the bus I can do fun things like driving analog gauges from the information on the bus (Speed, coolant temp, rpm, etc).

    I know most guys here are not going to like a drive by wire setup though . Honestly it works out well for the swap and the Dodge truck setup works very well with the stock M truck gas pedal.

    Jason

  8. #8

    Default

    Have there been any new developments with a 5.7 Hemi harness?

Similar Threads

  1. engine swap 230 to 350
    By angler in forum Modified Tech
    Replies: 8
    Last Post: October 26th, 2008, 07:15 AM
  2. Cummins 6bt engine mount
    By Kamikaze12volts in forum Modified Tech
    Replies: 12
    Last Post: February 28th, 2008, 07:23 PM
  3. Cummins 6bt swap
    By rocky4by in forum Modified Tech
    Replies: 24
    Last Post: January 23rd, 2008, 07:59 PM
  4. Cummins Engine FAQ
    By brute4c in forum Modified Tech Archives
    Replies: 0
    Last Post: May 31st, 2007, 10:04 AM
  5. engine swap
    By fhozaly in forum Stock Tech
    Replies: 5
    Last Post: January 28th, 2007, 09:55 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Site Upgrade, Design Modifications & Administrative Support by:
Palm River Enterprises LLC, IT Solutions
President: Tom King, User ID=teking
This site is owned and operated by:
M715 Zone, LLC
President: Jon Schmidt, User ID=brute4c


If you have any suggestions, comments, problems or questions, contact:  brute4c@m715zone.com
Use of this site means you understand and agree to our TERMS OF USE

Copyright Notice:
This web site is subject to the protection of the copyright laws of the United States and other countries. Except for Personal Use Only, you may not modify, copy, distribute, transmit, display, perform, reproduce, publish, license, create derivative works from, transfer, or sell any information obtained from any part of the M715 Zone website without the prior written permission of M715 Zone, LLC. Written permission can only be obtained by contacting brute4c@m715zone.com

Copyright 1998-2024