Page 1 of 2 12 LastLast
Results 1 to 10 of 19

Thread: Brake shoes for dummies

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Dec 2006
    Location
    Springdale, Arkansas
    Posts
    1,431

    Default Brake shoes for dummies

    Okay, I'm talking about my left side (drivers side) brake shoes, front and rear axles.
    Okay, there are long and short linings on the shoes, I know that. There is one shoe facing forward and one facing backwards.
    Now here's the question;

    I found the front wheel shoes with the short lining'd shoe on the rear, long on the front.

    On the rear axle I found the short lining'd shoe on the front and the long on the rear.

    They were basically 180* out from each other, were they installed wrong?
    If so, what is the correct way/sequence to mount them. Remember, please dont get too wordy, I can do it if it's kept as simple as possible. Thanks a load in advance.

  2. #2
    Join Date
    Jan 2007
    Location
    west central wisconsin
    Posts
    315

    Default

    Usuaully short in front long on back,I'm not sure about the 715 tho.

    DJ

  3. #3

    Default

    Like Dave says. Short to the front and long on the back. On the right side the star wheel is next to the secondary shoe (long shoe). On the left side the star wheel is towards the primary shoe (short shoe). Also make sure the arrow on the brake self-centering anchor block points to the front of the vehicle.

    For those who have relined shoes, the linings are usually the same length so position doesn't matter.

  4. #4
    Join Date
    Dec 2006
    Location
    Springdale, Arkansas
    Posts
    1,431

    Default

    Verrry Cool. Thanks, y'all. Short to front, long in the back. Wonder how much difference it made having them reversed on that front wheel?
    Last night I had to take the plate down to mount the rear wheel cyl. I also broke 3 grinding bits on my dremel opening up the holes. That mounting plate is thick!

  5. #5
    Join Date
    Jul 2007
    Location
    Rhoadesville, Virginia (five miles from no place)
    Posts
    5,125

    Default

    Short in front is always the rule on every vehicle I have been into. By reversing the shoes, I have noticed there is less "grab" when the brakes are applied.

    Not sure the theory behind that though, but as Kwai put it, relined shoes are all the same length linings, so it must not be too important to have a shorter lining up front, just not the short one in back.

  6. #6

    Default

    it has to do with the leading shoes desire to grab an self-energize agianst the drum a shorter lining is best to accomplish this. most often utilized with self adj brake designs manual adj brakes tend to use similar linings although I do know the cj2a (45-49) used a short long lining with the long shoe on front the manual doesnt explain why. For further info visit here: www.cdxetextbook.com/index.html
    68 M-715 MVPA #2710

  7. #7

    Default

    after reviewing the manual it dosent mention placement of the primary or secondary shoes- which is why it was covered in the army motors update that is linked by warwick above. I also read a couple things I didnt know such as the anchor block has an arrow on it which must point foward, I wonder if mine are? Ill have to ck them when i do my reline soon. also they instruct that the primary return spring go on first always, and lastly that the brake pedal pivot bolt is an eccentric and adjusts the free play in the brake pedal travel (spec is 1/2 inch). mine does seem ok there. but its apparent i need to reread my manual I have been missing alot of info.
    68 M-715 MVPA #2710

  8. #8
    Join Date
    Dec 2006
    Location
    Springdale, Arkansas
    Posts
    1,431

    Default

    Awsome post! I'm right here in this point of the game too. I'm dropping off my brake shoes for relining tomorrow, meanwhile I need a new inner seal to install.

  9. #9

    Default

    The principle used with the M715 brake configuration is what they call "Duo-Servo", basically, that is why there is no lower shoe anchor. The ending result is that there is more pressure applied to the rear shoe ( when moving forward, of course) and is considered self-energizing. Shorter pad goes in front, more surface for the back shoe...

  10. #10

    Default

    Quote Originally Posted by kwai View Post
    Like Dave says. Short to the front and long on the back. On the right side the star wheel is next to the secondary shoe (long shoe). On the left side the star wheel is towards the primary shoe (short shoe). Also make sure the arrow on the brake self-centering anchor block points to the front of the vehicle.

    For those who have relined shoes, the linings are usually the same length so position doesn't matter.
    When mine came back from relining, same length for all the shoes.

Similar Threads

  1. Brake Shoes
    By terryb in forum Open Discussion
    Replies: 65
    Last Post: January 29th, 2018, 05:17 PM
  2. oilcan : modified modern brake shoes for stock axles
    By oilcan in forum PseudoZone - Open Archive
    Replies: 4
    Last Post: November 11th, 2009, 02:06 AM
  3. Front brake shoes wet...
    By Fastfrankie in forum Open Discussion
    Replies: 5
    Last Post: August 17th, 2009, 08:23 PM
  4. wheel cyl and brake shoes need
    By angler in forum Modified Tech
    Replies: 3
    Last Post: May 21st, 2007, 10:07 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Site Upgrade, Design Modifications & Administrative Support by:
Palm River Enterprises LLC, IT Solutions
President: Tom King, User ID=teking
This site is owned and operated by:
M715 Zone, LLC
President: Jon Schmidt, User ID=brute4c


If you have any suggestions, comments, problems or questions, contact:  brute4c@m715zone.com
Use of this site means you understand and agree to our TERMS OF USE

Copyright Notice:
This web site is subject to the protection of the copyright laws of the United States and other countries. Except for Personal Use Only, you may not modify, copy, distribute, transmit, display, perform, reproduce, publish, license, create derivative works from, transfer, or sell any information obtained from any part of the M715 Zone website without the prior written permission of M715 Zone, LLC. Written permission can only be obtained by contacting brute4c@m715zone.com

Copyright 1998-2024