Results 1 to 6 of 6

Thread: front wheel seals

  1. #1

    Default front wheel seals

    since the parts page is down does anyone know the aftermarket part num. for the front wheel seals?

  2. #2
    Join Date
    Sep 1998
    Location
    North Central Wisconsin
    Posts
    11,520

    Default

    Do you mean the axle grease seals? If so this is in the parts file pages:
    The part numbers you require are as follows:
    1.) Inner Bearing Oil/Grease Seal (National # 475384 x 54);
    2.) Complete Knuckle Gasket/Seal Kit (Spicer # 706230X) which includes 12 x rear oil seal bolts, 2 x outer metal seal, felt gasket, rubber seal, and metal ring seal.
    Try your local Napa first, then Border Parts
    619/461-0171, then Motion Industries 619 or 858/565-0092.

  3. #3
    Join Date
    Dec 2003
    Location
    Giddings, Texas
    Posts
    7,729

    Default

    Another option is AB Linn. He has seals for all 4 corners on E-Bay all the time at around $16.00 for the set.
    Remember if you didn't build it you can't call it yours.

    6.2 powered M715, 5 M1009's, M416, 2 M101's, 2 M105's, 3 M35's, M1007 6.5 turbo Suburban project called Cowdog.

    https://www.youtube.com/channel/UCCz...HGkBCfhXZ5iuaw

  4. #4

    Default

    just looking to repack front bearings

  5. #5
    Join Date
    Dec 2003
    Location
    Giddings, Texas
    Posts
    7,729

    Default

    If you try buying one front seal at a NAPA or any place local to you, it will probably be $20+ for the one seal. That is why I mentioned AB Linn and all 4 seals for $16.00.

    Now, if you just need the paper gasket on the outside of the hub for the splined hub plate. Just use rtv sealant.
    Remember if you didn't build it you can't call it yours.

    6.2 powered M715, 5 M1009's, M416, 2 M101's, 2 M105's, 3 M35's, M1007 6.5 turbo Suburban project called Cowdog.

    https://www.youtube.com/channel/UCCz...HGkBCfhXZ5iuaw

  6. #6
    Join Date
    Jan 2004
    Location
    Northern Colorado
    Posts
    324

    Default

    When I installed my front disc brake kit, I replaced the seal that mounts to the hub. It was $47 from NAPA. Like previously stated, AB Linn has em MUCH cheaper. I didn't know before I bought it, but now I do.

Similar Threads

  1. Front and rear door seals
    By guswheels in forum Stock Tech
    Replies: 10
    Last Post: October 13th, 2020, 10:25 AM
  2. front wheel well height? for a stock truck.
    By Duane in forum Stock Tech
    Replies: 4
    Last Post: March 27th, 2010, 07:47 AM
  3. Front wheel/hub/drum help
    By Chumley in forum Stock Tech
    Replies: 3
    Last Post: December 14th, 2008, 06:47 PM
  4. NAPA part numbers for front and rear wheel bearings?
    By maddawg308 in forum Open Discussion
    Replies: 13
    Last Post: January 5th, 2008, 11:33 AM
  5. Front Knuckle Seals
    By fng in forum Stock Tech
    Replies: 15
    Last Post: November 28th, 2007, 12:37 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Site Upgrade, Design Modifications & Administrative Support by:
Palm River Enterprises LLC, IT Solutions
President: Tom King, User ID=teking
This site is owned and operated by:
M715 Zone, LLC
President: Jon Schmidt, User ID=brute4c


If you have any suggestions, comments, problems or questions, contact:  brute4c@m715zone.com
Use of this site means you understand and agree to our TERMS OF USE

Copyright Notice:
This web site is subject to the protection of the copyright laws of the United States and other countries. Except for Personal Use Only, you may not modify, copy, distribute, transmit, display, perform, reproduce, publish, license, create derivative works from, transfer, or sell any information obtained from any part of the M715 Zone website without the prior written permission of M715 Zone, LLC. Written permission can only be obtained by contacting brute4c@m715zone.com

Copyright 1998-2024