Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: Windshield Glass Replacement Cost??

  1. #1
    Join Date
    Jan 2007
    Location
    North West Arkansas
    Posts
    69

    Default Windshield Glass Replacement Cost??

    Has anyone priced replacing the windshield glass in their trucks lately??? How costly is it? I guess they can't order so they just cut to size?
    James G.

  2. #2
    Join Date
    Dec 2006
    Location
    Springdale, Arkansas
    Posts
    1,431

    Default

    I just replaced my windshield a few weeks ago. I took them the frame with the old glass still in it so they could use it as a template, they cut it perfectly, reused the gasket and handed me back the frame in less than an hour. They used 1/4" laminated safety glass with a small amount of bevel so it wouldnt cut into the rubber. (BTW, I used Ace autoglass in Lowel) and $120 bucks later I could see out again.

  3. #3
    Join Date
    Mar 2004
    Location
    northern Arizona
    Posts
    1,025

    Default

    I think mine was $150 or so for the 725, but it's a bigger windshield than the 715s.
    67 M725 67 M715 68 M715

  4. #4

    Default

    I paid about $100 and had them put in a new gasket.

  5. #5
    Join Date
    Feb 2004
    Location
    Silver Lake Sand Dunes MI
    Posts
    1,397

    Default

    Quote Originally Posted by kwai View Post
    I paid about $100 and had them put in a new gasket.
    That's the same as what I paid for mine.

    Dave
    1967 Kaiser Jeep M715 weapons carrier:http://www.davidallenracing.com/M715.htm
    1967 Kaiser Jeep M35a2 2.5 ton cargo truck: http://www.davidallenracing.com/M35A2.htm
    Delta Team Decals: http://www.i2k.com/~schwarzd/

  6. #6
    Join Date
    Dec 2003
    Location
    Giddings, Texas
    Posts
    7,623

    Default

    I think mine was $120 with a new gasket. I got clear because I didn't want to worsen the reflected glare at night.
    Remember if you didn't build it you can't call it yours.

    6.2 powered M715, 5 M1009's, M416, 2 M101's, 2 M105's, 3 M35's, M1007 6.5 turbo Suburban project called Cowdog.

  7. #7

    Default

    Man I got took but they had to replace the rubber and also did both of the small windows in the rear doors on my M725. $300

  8. #8
    Join Date
    Dec 2003
    Location
    Giddings, Texas
    Posts
    7,623

    Default

    My total for the front windshield, new front rubber, rear hard top glass (tinted) and new rear rubber was just below $200. I took the windshield frame and hard top to them so they didn't have to crawl around on the truck to do it which saved me some too.
    Remember if you didn't build it you can't call it yours.

    6.2 powered M715, 5 M1009's, M416, 2 M101's, 2 M105's, 3 M35's, M1007 6.5 turbo Suburban project called Cowdog.

  9. #9

    Default

    Where did you guys get the windshield gasket??

  10. #10
    Join Date
    Sep 1998
    Location
    North Central Wisconsin
    Posts
    11,354

    Default

    The same place you get the glass....they usually have the gasket stuff in stock...its a basic common type.

Similar Threads

  1. airborne : Windshield glass gasket,
    By airborne in forum PseudoZone - Open Archive
    Replies: 12
    Last Post: November 12th, 2009, 05:13 AM
  2. aaron871 : Windshield Glass
    By PseudoZone in forum PseudoZone - Open Archive
    Replies: 12
    Last Post: November 10th, 2009, 11:56 PM
  3. Windshield glass...
    By Snuffy in forum Open Discussion
    Replies: 6
    Last Post: July 12th, 2009, 08:39 PM
  4. Cost of a new 4BT?
    By ChalkOutline in forum Open Discussion
    Replies: 5
    Last Post: February 13th, 2008, 10:33 AM
  5. Windshield glass gasket
    By Archiver in forum Open Discussion Archives
    Replies: 0
    Last Post: December 24th, 2006, 04:44 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Site Upgrade, Design Modifications & Administrative Support by:
Palm River Enterprises LLC, IT Solutions
President: Tom King, User ID=teking
This site is owned and operated by:
M715 Zone, LLC
President: Jon Schmidt, User ID=brute4c


If you have any suggestions, comments, problems or questions, contact:  brute4c@m715zone.com
Use of this site means you understand and agree to our TERMS OF USE

Copyright Notice:
This web site is subject to the protection of the copyright laws of the United States and other countries. Except for Personal Use Only, you may not modify, copy, distribute, transmit, display, perform, reproduce, publish, license, create derivative works from, transfer, or sell any information obtained from any part of the M715 Zone website without the prior written permission of M715 Zone, LLC. Written permission can only be obtained by contacting brute4c@m715zone.com

Copyright 1998-2022