The build of my '68 715 that was going to take a week looks like it will take all summer. It has rained for the last week & a half which makes it hard to work out side. But progress is being made. The '78 Ford NP205 is now in place resting on mostly the stock mounts combined with some brackets that came with the t-case.
The front and rear drive lines are connected up using combination size u-joints that fit the Ford yokes and the stock shafts.
I may use the center from a CV joint to make the shaft between the trans and t-case.
The next step will be to cut out and move the engine brackets to line up with the engine mounts. The engine is setting on the exhaust manifolds now.