I just had to make a new lock for my winch handle. I bought the entire set up from a friend and it didnt have the lock on the handle. I made a new one from the picture in the parts book. Just want to know how much to cut it in the middle.
I just had to make a new lock for my winch handle. I bought the entire set up from a friend and it didnt have the lock on the handle. I made a new one from the picture in the parts book. Just want to know how much to cut it in the middle.
Roger,
I just did a qucik measurement on mine.
On the drivers side, from the inside edge of the loop to the end of the opening in the loop, 1.5 inches.
On the passenges side from inside of the loop to opening in the loop(by the winch lever) 7/8 of an inch. If this does not make sense, PM your phone # I will give you a call. We are both on the Island.
I'm not sure what you mean by PM but I thought I was the only one with a M715 on long island my number is 516-248-0422 call me anytime thanks
"PM" is "Private Message" which you can send another member by clicking on their username.
-- Tim Taylor
Site Upgrade, Design Modifications & Administrative Support by: Palm River Enterprises LLC, IT Solutions President: Tom King, User ID=teking |
This site is owned and operated by: M715 Zone, LLC President: Jon Schmidt, User ID=brute4c |
Copyright Notice: This web site is subject to the protection of the copyright laws of the United States and other countries. Except for Personal Use Only, you may not modify, copy, distribute, transmit, display, perform, reproduce, publish, license, create derivative works from, transfer, or sell any information obtained from any part of the M715 Zone website without the prior written permission of M715 Zone, LLC. Written permission can only be obtained by contacting brute4c@m715zone.com |