Page 1 of 4 1234 LastLast
Results 1 to 10 of 33

Thread: Tire prices?

  1. #1

    Default Tire prices?

    I'm lookin' at a set of four 9.00 x 16 XLs, runflats removed, 40% tread and supposedly no weather checking. What do you think a fair price, mindfull shipping is not included?

  2. #2

    Default

    That's a tough question. If I were looking at them and definitely needed some rubber for the truck, I'd give $70.00 max. a tire if they were close enough to pick-up.

    This is considering that I don't drive the truck too often, so a 40% tire may last me a long time, and XL's aren't exactly easy to come by. Plus, the load rating on the Michelin XL's and XZL's is pretty dang high, which leads me to believe that they will provide a higher mileage life than a typical tire. A good new generic truck tire is at least $160/ea., and 40% of that is about $65.

    Personally, I'd go to the local Co-op and buy some meaty Power Kings or similar for $175/ea. and then not worry about tires for a long time. The size your looking for is not as difficult to accommodate as if you were looking for 11.00-16 XL's.

  3. #3
    Join Date
    Dec 2006
    Location
    New Jersey by Philadelphia
    Posts
    282

    Default

    I agree....before I spend big money on used tires, I will buy Power Kings 9.00x16 for $135 each and they are FRESH. They will last probably a decade or more before wathering/dry rot sets in.
    Buying 5 year old Michelins in my opinion isn't the best option. I've had two tire guys who said that all Michelins start to dry rot/crack after a few years. Both guys sell Michelins and they said the same thing. One of my cars has Michelins, is garage kept with 12,000 miles and the tires are 8 years old. They all have the tiny cracks in the treads...no different that the two pairs of like new Michelin XL's that I saw in person.

  4. #4

    Default

    Ok, but here's a better question. Has anyone ever heard of a 11.00 x 16 XL fail on a M715 or similar vehicle? I think that the XLs are a much better made tire than most of you give them credit for. The sidewall cracking is minimal on all of the XLs I have seen and looks to be more from the extremely thick sidewall flexing than from any sort of rot.
    -What We Have, We Hold-

  5. #5
    Join Date
    Oct 2006
    Location
    Port Orchard, Wash.
    Posts
    4,572

    Default

    I'm with the Monster and Frankie. Check out some Co-op Grip Spurs or Mudders.

    And Frankie, I think you worry too much about the XLs.
    -- Tim Taylor


  6. #6
    Join Date
    Dec 2003
    Location
    Giddings, Texas
    Posts
    7,729

    Default

    GSA had some 100% new XZL's a month or so ago that went for $105.00 each. You had to buy 5, but figure $300 to ship to you and that should be your base price for Michelin's. With $150 each your top dollar for 80% or better tires.

    I love my XZL's on the road, on the dirt and the amazing visual impact. I had a guy at my house yesterday dropping off some trailers. He is a semi truck driver that does nothing but move big military vehilces around the country. He kept looking at my truck and commenting on how great those tires looked. It is hard to impress a guy who shows up in an 18 wheeler, but the XZL's did it.
    Remember if you didn't build it you can't call it yours.

    6.2 powered M715, 5 M1009's, M416, 2 M101's, 2 M105's, 3 M35's, M1007 6.5 turbo Suburban project called Cowdog.

    https://www.youtube.com/channel/UCCz...HGkBCfhXZ5iuaw

  7. #7

    Default

    Would someone be kind enough to post a photo of an M715 with XZLs please?

    I'm assuming that "GSA" is "Government Surplus Auctions"?
    1967 & 1968 M715
    The ChopTop

  8. #8
    Join Date
    Dec 2003
    Location
    Giddings, Texas
    Posts
    7,729

    Default

    Look at my avator and here is a link to GSA.

    http://gsaauctions.gov/gsaauctions/gsaauctions/

    GL is another good place to look.

    http://www.govliquidation.com/
    Remember if you didn't build it you can't call it yours.

    6.2 powered M715, 5 M1009's, M416, 2 M101's, 2 M105's, 3 M35's, M1007 6.5 turbo Suburban project called Cowdog.

    https://www.youtube.com/channel/UCCz...HGkBCfhXZ5iuaw

  9. #9

    Default

    Thanks for the links!

    I'm not being rude, but I was hoping for a photo larger than 80 pixels to look at.
    1967 & 1968 M715
    The ChopTop

  10. #10
    Join Date
    Dec 2003
    Location
    Giddings, Texas
    Posts
    7,729

    Default

    Yeah, I just read what I wrote and it is kind of a smart alek reply. Sorry about that.

    Try these of my truck. Others have more of theirs.

    Click on these and view them in non squint size.
    Attached Images Attached Images
    Remember if you didn't build it you can't call it yours.

    6.2 powered M715, 5 M1009's, M416, 2 M101's, 2 M105's, 3 M35's, M1007 6.5 turbo Suburban project called Cowdog.

    https://www.youtube.com/channel/UCCz...HGkBCfhXZ5iuaw

Similar Threads

  1. Prices - M715 vs M37
    By rboltz in forum Open Discussion
    Replies: 11
    Last Post: March 5th, 2010, 07:36 PM
  2. Tire Prices
    By fng in forum Open Discussion
    Replies: 9
    Last Post: September 27th, 2007, 10:26 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Site Upgrade, Design Modifications & Administrative Support by:
Palm River Enterprises LLC, IT Solutions
President: Tom King, User ID=teking
This site is owned and operated by:
M715 Zone, LLC
President: Jon Schmidt, User ID=brute4c


If you have any suggestions, comments, problems or questions, contact:  brute4c@m715zone.com
Use of this site means you understand and agree to our TERMS OF USE

Copyright Notice:
This web site is subject to the protection of the copyright laws of the United States and other countries. Except for Personal Use Only, you may not modify, copy, distribute, transmit, display, perform, reproduce, publish, license, create derivative works from, transfer, or sell any information obtained from any part of the M715 Zone website without the prior written permission of M715 Zone, LLC. Written permission can only be obtained by contacting brute4c@m715zone.com

Copyright 1998-2024