here is the progress rom this weekend. tailgate, lights, and custom farication of the tralier hitch. the tailgate was purchased at east coast kaiser in ct. it had quite a warp to it. a 1.5 x 1.5 continuous angle was welded to the bottom and acted as a straightening bar. we clamped it in about 6 places and tack welded it for now. the hinge fingers on the tailgate we all messed up. some quick persuasion with the blow torch and a 4 pound hammer moved them back into place. homemade pins from 7/16" rod stock with a drilled out nut on one end and a jesus pin on the other.

rocker switch, main switch and 12v switch console will have to be slightly relocated when the battery box cover is installed.

12 v converter behind the passenger seat this is connected to a battery charge connection just behind the driver side door.

main fuse boxes mounted on front fender

reverse light switch mounted below dash. i rigged up a typical cat eye driving light with a white and clear lens at the rear bumper as a reverse light. thanks for the great idea barrman