well body is on, im going to have to cut a channel into the storage " tube". otherwise the bed and cab would sit too tall for my liking. oddly enough this body fits pretty well.
well body is on, im going to have to cut a channel into the storage " tube". otherwise the bed and cab would sit too tall for my liking. oddly enough this body fits pretty well.
I had the same issue but when I moved my body brackets up (cut and weld) and used the original Dodge body rubber/mounts (which are about 3” thick) it leveled the cab up. I then put some 1” thick rubber spacers under the bed (ordered online) and now mine is the exact height/relationship between bed/cab as it was on the old frame without cutting the storage space. PM me if you have questions.
lots of work getting done, body and bed on the frame and mounts built, wheelbase is perfect. next engine and trans mock up. i also got a set of hummer wheels for a great deal they make the truck look great
engine is in and mounts are made. the engine is about 6.5 in back from the stock mounts the trans fits great. i have it sitting about 1\2 and inch lower than stock as well
more engine pics with turbo and front clip on
i fabbed up the hydro-boost and shortened the push rod to mount to the stock location on the stock kaiser pedal, pretty straightforward and easy.
Nice. Going to have it going by summer?
clutch master install was very much the same process, mock up and weld the stock linkage onto the new clutch master cylinder. it all fits good and the dodge hoses tuck in nicely
i doubt ill have it done for summer im hoping for jeep Easter safari 2021. i still have to finish fab work, tear down, powdercoat\ paint and re assemble but thanks for the support
Dude... looking great!
Site Upgrade, Design Modifications & Administrative Support by: Palm River Enterprises LLC, IT Solutions President: Tom King, User ID=teking |
This site is owned and operated by: M715 Zone, LLC President: Jon Schmidt, User ID=brute4c |
Copyright Notice: This web site is subject to the protection of the copyright laws of the United States and other countries. Except for Personal Use Only, you may not modify, copy, distribute, transmit, display, perform, reproduce, publish, license, create derivative works from, transfer, or sell any information obtained from any part of the M715 Zone website without the prior written permission of M715 Zone, LLC. Written permission can only be obtained by contacting brute4c@m715zone.com |