I recently acquired a M715, I’m also new to the forums, first timer here. I have a 1990 d350 with 6bt. I’m thinking about swapping the entire drivetrain into the 715. Has anyone ever used the Dana rears from the dodge pickup?
I recently acquired a M715, I’m also new to the forums, first timer here. I have a 1990 d350 with 6bt. I’m thinking about swapping the entire drivetrain into the 715. Has anyone ever used the Dana rears from the dodge pickup?
Rears are pretty easy if they are wide enough to clear the spring packs....Measure between the backing plates.
Is that real money?
So the dana60/70 in the rear of the dodge truck won’t fit under the M715? I’m measuring it all today so I’ll know by this afternoon. That will be a bummer.
I used an early '90's Dodge D-60. The WMS to WMS was great, Backing plates were wide enough but I did have to move the spring perches on each side and relocate the shock mounts.
That’s great to know. Thanks for the info.
Welcome! Many Zoners have done similar swaps and it’s alot of work but should be a good project. Some custom mounts and will probably have to redo the axle perches but should work. Might want to check axle width. M715 hub to hub /axle width is pretty wide.
Watch your pinion angle. If you use an NP205 or other high rear output t-case you'll need to pitch the pinion up to about a 10 degree slope or more.
Mine is going to live with what I have for now and solid u-joints.
It's right on the edge of needing a double cardan joint in the shaft and that would require raising the pinion to 15 degrees.
Sent from my SAMSUNG-SM-G890A using Tapatalk
Site Upgrade, Design Modifications & Administrative Support by: Palm River Enterprises LLC, IT Solutions President: Tom King, User ID=teking |
This site is owned and operated by: M715 Zone, LLC President: Jon Schmidt, User ID=brute4c |
Copyright Notice: This web site is subject to the protection of the copyright laws of the United States and other countries. Except for Personal Use Only, you may not modify, copy, distribute, transmit, display, perform, reproduce, publish, license, create derivative works from, transfer, or sell any information obtained from any part of the M715 Zone website without the prior written permission of M715 Zone, LLC. Written permission can only be obtained by contacting brute4c@m715zone.com |