Does anyone know if any of the conversion kits will install in the 12 v dist? Ignitor, Pertronix, and mallory all make a kit, I was wondering if anyone had tried it?
Does anyone know if any of the conversion kits will install in the 12 v dist? Ignitor, Pertronix, and mallory all make a kit, I was wondering if anyone had tried it?
One member, kalikraven, did it with a Crane kit...this is from the page I made for it that isnt online again yet:
One of our members, Kalikraven, managed to find a kit and work it into the stock distributor housing to give an Electronic Ignition upgrade...no more points!! Here is his info:
Using the stock breaker plate and the "new" plate that comes with the kit, I installed the Crane XR-1 electronic ignition kit. I have this running on 12 volts now. I added a 12 volt coil but have not changed the wiring.
The crane kit overhangs the plate a little bit. I had to make a little room in the dist by using a Dremel and removing a little material.
I used the Crane kit for a ford V8 because it rotates in the same direction. Got it from jegs for $65.
These are pics of the kit... I found Summit lists 3 part numbers for this, though all are the same price and have the exact same description. They show part numbers:
CRN-750-1700, CRN-750-1710, CRN-750-1720
Lord send your Holy Ghost into our hearts and make the desire of our hearts Your Will.
Pro-choice, that's a LIE, babies don't choose to die!!
There is also a member who has used the pertronix setup, but I dont have the details yet...
Lord send your Holy Ghost into our hearts and make the desire of our hearts Your Will.
Pro-choice, that's a LIE, babies don't choose to die!!
Thamks Jon. How does the v8 kit work? I get the cwr/ccwr thing, but what about the 'trigger' for the pulses?
That is all the info I have...I wish I had more....
Lord send your Holy Ghost into our hearts and make the desire of our hearts Your Will.
Pro-choice, that's a LIE, babies don't choose to die!!
Thanks. I'll just wait and see if someone has anything they haven't told about. Anybody???????????
Converted a Chevelle over to the Mallory unit , maybe 25 years ago . Didn't seem to affect the power either way , but was a whole lot easier to start . Still have not had issues with it up till now . It's triggered by the rotor .
I am running a Pertronix unit in my M715 (12v with a Chevy) I like it. Way easier to start, especially when hot.
Easy set-up. Clear instructions. No points to fool with. No more ballast resisitor either, with the Pertronix coil.
Best part: About a c-note with the coil, plus shipping.
It triggers from a wheel that slips over the dizzy shaft at the point cam. Air gap between the trigger wheel and the sensor is critical, and you must advance your timing a little.
This is the second Pertronix unit I've had. The first one was in my Unimog and it made a world of difference, too.
Twodogs, a part #? Getting rid of the resistor is worth it to me. Who did you get it from, JCW, Quadratec, local parts house?????
I have a Pertronix in my Austin Mini.....and it grenaded cause I used the wrong coil Gotta get a new one and a new coil.
Site Upgrade, Design Modifications & Administrative Support by: Palm River Enterprises LLC, IT Solutions President: Tom King, User ID=teking |
This site is owned and operated by: M715 Zone, LLC President: Jon Schmidt, User ID=brute4c |
Copyright Notice: This web site is subject to the protection of the copyright laws of the United States and other countries. Except for Personal Use Only, you may not modify, copy, distribute, transmit, display, perform, reproduce, publish, license, create derivative works from, transfer, or sell any information obtained from any part of the M715 Zone website without the prior written permission of M715 Zone, LLC. Written permission can only be obtained by contacting brute4c@m715zone.com |