Results 1 to 10 of 10

Thread: Orginial motor

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1

    Default Orginial motor

    As threaten, motor was put in storage building. At some cost and effort might I add. What now? An old saying, todays junk is tomorrows gold. Is this motor worth rebuilding? What about rebuild parts? their cost? What are the orginial problems, besides being under powered for the truck. Your thinking?

  2. #2

    Default

    Quote Originally Posted by longrider999 View Post
    As threaten, motor was put in storage building. At some cost and effort might I add. What now? An old saying, todays junk is tomorrows gold. Is this motor worth rebuilding? What about rebuild parts? their cost? What are the orginial problems, besides being under powered for the truck. Your thinking?
    I can't speak to your rebuilding questions (though I've heard parts are scarce & pricey), but I know this: here at 5000', that 230 does pretty well moving my truck around with its stock drivetrain & gearing. At your lower elevation, a 230 would quite adequate I would think, and maybe even sort of, well, powerful.

  3. #3

    Default

    Quote Originally Posted by longrider999 View Post
    As threaten, motor was put in storage building. At some cost and effort might I add. What now? An old saying, todays junk is tomorrows gold. Is this motor worth rebuilding? What about rebuild parts? their cost? What are the orginial problems, besides being under powered for the truck. Your thinking?
    Is this the "parts motor, rough shape" from your ad back in July?


    Sadly, your probably wasting time and storage money holding on to it for someone who might need it.


    Shipping costs, kills any value that a parts engine might have.

  4. #4
    Join Date
    Sep 2014
    Location
    Wichita Falls, TX
    Posts
    603

    Default

    I held onto my old engine for a while, wasn't costing me anything but space though. I'd already sold the manifolds, carb, water pump, alternator....

    Not 2 days after I got tired of looking at it and hauled it off someone posted needing a timing cover.

  5. #5

    Default

    If someone wants a restored M715 to factory specs and the truck they are restoring has been converted to a V8 or diesel then your motor may be worth something for them. If someone has a M715 that they are just bopping around in and the 350 chevy they put in works just fine then it has no value to them. It just depends on the person needing it. If you wanted to restore the engine and hold onto it until someone was looking for a restored motor you could do that I suppose, but I wouldn't.
    If you have it in storage now and if it is not costing you an arm and a leg to keep it there I say hang onto it for a few years someone may need it for parts or to rebuild.
    Zone holster maker

  6. #6

    Default Thank you

    Wanted to thank all who took time to reply to some of my questions, Would still like to talk to the crew who has rebuilt these motors. Seems like the water pump poses some problems. As in what? Fuel pump is also mention.
    Found a place who has several carbs..... but priceie.. THANKS AGAIN!!!

  7. #7

    Default

    Quote Originally Posted by longrider999 View Post
    Wanted to thank all who took time to reply to some of my questions, Would still like to talk to the crew who has rebuilt these motors. Seems like the water pump poses some problems. As in what? Fuel pump is also mention.
    Found a place who has several carbs..... but priceie.. THANKS AGAIN!!!
    As have been through rebuilding a Tornado from start to finish. I can try to answer any specific questions that you may have.
    I also took several photos along the way.

    As for the water pump, the bearings are prone to failure from the heavy pulley.
    Also don't over tighten the fan belts, leave them loose.

    As for the fuel pump, rebuild with a quality kit that is compatible with todays alcohol blended fuels and you won't have any problems.
    Since the fuel pump isn't vented to the atmosphere, it can leak fuel into the crankcase oil without warning if the diaphragm starts to fail.


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Site Upgrade, Design Modifications & Administrative Support by:
Palm River Enterprises LLC, IT Solutions
President: Tom King, User ID=teking
This site is owned and operated by:
M715 Zone, LLC
President: Jon Schmidt, User ID=brute4c


If you have any suggestions, comments, problems or questions, contact:  brute4c@m715zone.com
Use of this site means you understand and agree to our TERMS OF USE

Copyright Notice:
This web site is subject to the protection of the copyright laws of the United States and other countries. Except for Personal Use Only, you may not modify, copy, distribute, transmit, display, perform, reproduce, publish, license, create derivative works from, transfer, or sell any information obtained from any part of the M715 Zone website without the prior written permission of M715 Zone, LLC. Written permission can only be obtained by contacting brute4c@m715zone.com

Copyright 1998-2024