Looking for an assist, as my truck is in Illinois.
What are the surface area dimensions for the front opening? I am looking to spec a pusher fan for the front of the radiator.
Looking for an assist, as my truck is in Illinois.
What are the surface area dimensions for the front opening? I am looking to spec a pusher fan for the front of the radiator.
Thanks, George
Joshua 24:15
Sorry if I'm not really sure what dimensions you mean?
The opening in front of the radiator isn't really square. It's about 22 inches wide at the bottom and about 23 inches wide at the top. It's about 16 inches tall.
There is quite a bit of room behind the opening though before the radiator core. Probably 6 inches.
I took pics but they didn't turn out that good because of the sun. I can retry later if you want pics.
Perfect Paul. Thanks
Thanks, George
Joshua 24:15
George you could stack at least 2 pushers in there and still be behind where a grill would fit if it had a grill.
Remember if you didn't build it you can't call it yours.
6.2 powered M715, 5 M1009's, M416, 2 M101's, 2 M105's, 3 M35's, M1007 6.5 turbo Suburban project called Cowdog.
https://www.youtube.com/channel/UCCz...HGkBCfhXZ5iuaw
The Taurus fan was a puller. You have to have a pusher design in front of the radiator. Hooking a puller up backwards might move air but it won't move it very well.
I don't know of a large single pusher out in the junk yards either.
Remember if you didn't build it you can't call it yours.
6.2 powered M715, 5 M1009's, M416, 2 M101's, 2 M105's, 3 M35's, M1007 6.5 turbo Suburban project called Cowdog.
https://www.youtube.com/channel/UCCz...HGkBCfhXZ5iuaw
Thanks Tim. Any recommendations?
Thanks, George
Joshua 24:15
George,
The 2006 and newer GM trucks have pretty large puller fans. So do the '88 or so and newer Camero/firebirds. Maybe two fans in separate housings can be positioned to clear the engine as pullers better than the Taurus assembly?
The last few years of the square body GM trucks had mechanical puller fans and auxiliary electric pushers. They were pretty darn big. Maybe a pair of them?
Remember if you didn't build it you can't call it yours.
6.2 powered M715, 5 M1009's, M416, 2 M101's, 2 M105's, 3 M35's, M1007 6.5 turbo Suburban project called Cowdog.
https://www.youtube.com/channel/UCCz...HGkBCfhXZ5iuaw
I'll give the a look. I'll be heading to Illinois again in 2 weeks
Thanks, George
Joshua 24:15
Site Upgrade, Design Modifications & Administrative Support by: Palm River Enterprises LLC, IT Solutions President: Tom King, User ID=teking |
This site is owned and operated by: M715 Zone, LLC President: Jon Schmidt, User ID=brute4c |
Copyright Notice: This web site is subject to the protection of the copyright laws of the United States and other countries. Except for Personal Use Only, you may not modify, copy, distribute, transmit, display, perform, reproduce, publish, license, create derivative works from, transfer, or sell any information obtained from any part of the M715 Zone website without the prior written permission of M715 Zone, LLC. Written permission can only be obtained by contacting brute4c@m715zone.com |