All
If I'm supplied a correct set I will offer them at cost, no markup.
Everyone needs to think about any improvements that could be made to the stock design
Sent from my SM-G900V using Tapatalk
All
If I'm supplied a correct set I will offer them at cost, no markup.
Everyone needs to think about any improvements that could be made to the stock design
Sent from my SM-G900V using Tapatalk
Pictures are worth a thousand words, and didn't take any.
But, I did a search and came up with this old thread
Scroll down to Binfords' post. Great pictures of a NOS defroster duct.
I was able to make a pretty good copy using the shop vac nozzles, and I pop riveted "L" brackets to the sides to fasten to the studs under the dash panel.
You can see the originals were pretty "Hoaky" in construction.
NOS ducts were selling upwards of $75.00 a piece when the supply was running out.
Defrost ducts questions
I traded a spare set to another member several years ago. I don't think he installed them on a truck yet. I will try and contact him. They were still in the military weather proof wrapping.
Remember if you didn't build it you can't call it yours.
6.2 powered M715, 5 M1009's, M416, 2 M101's, 2 M105's, 3 M35's, M1007 6.5 turbo Suburban project called Cowdog.
https://www.youtube.com/channel/UCCz...HGkBCfhXZ5iuaw
I really don't think they were hoaky in construction, they installed easy, and have never cracked being in my truck, and seal up well.
The black plastic pair that I have came to me used from a local low mileage M715 being parted out. The small metal attachment brackets were very loose on the plastic molded "posts" they were connected to. I repaired that looseness with a sheet metal repair plate around the damaged area and pop rivets.
Honestly, for being 50 years old, the plastic ducts are in great shape with no age cracking or brittle-ness.
Also, I saw a good used pair of these on e bay in the last 12 months or so and I think they sold for under $90.
I'm interested in the 3-d printing option and these seem like the perfect item to reproduce that way.
Bryce
1969 M725 ambulance
Good conversation guys keep it up.
Yes any and all improvements could be made if people have a pair I can borrow and reverse engineer.
Sent from my SM-G900V using Tapatalk
I got some heater parts from a local place in Colo. Sprgs. called FN Jeep, lotsa of old Wagoneer and Jeep pickup parts seem to match up for M715 heaters. I got the new duct work off of E-Bay. Also Collins Brothers Jeep used to have a bunch of older heater parts that might be found.
Site Upgrade, Design Modifications & Administrative Support by: Palm River Enterprises LLC, IT Solutions President: Tom King, User ID=teking |
This site is owned and operated by: M715 Zone, LLC President: Jon Schmidt, User ID=brute4c |
Copyright Notice: This web site is subject to the protection of the copyright laws of the United States and other countries. Except for Personal Use Only, you may not modify, copy, distribute, transmit, display, perform, reproduce, publish, license, create derivative works from, transfer, or sell any information obtained from any part of the M715 Zone website without the prior written permission of M715 Zone, LLC. Written permission can only be obtained by contacting brute4c@m715zone.com |