For anyone that's done shackle reversal and springover, how much longer did you go with the rubber flex line going from the frame to the axle (rear) or the frame to the spindles?
For anyone that's done shackle reversal and springover, how much longer did you go with the rubber flex line going from the frame to the axle (rear) or the frame to the spindles?
Big Blocks RULE!
haven't done one on a m715 but i lifted a 74 chev 6 inches and got longer rubber lines from Springfield Brake Co. in Springfield Mo. 1-800-333-2725 or 417-862-9233, hope that helps. they can make lines. larry
Thanks Larry...I'll check them out tomorrow! I've been digging into it more too this evening and found one of the 4x4 rags had an add for a place and I went to their site. They had Earls and Russel stuff but nothing was in stock. I checked Summit and they have different models and lengths in stock.
Big Blocks RULE!
I thought about just hooking two together, with a bungee in the middle to keep it out of the way and also allow it to flex if needed. No spring over, just planning for more flex in the future.
This post is closed-captioned for the hearing impaired.
Site Upgrade, Design Modifications & Administrative Support by: Palm River Enterprises LLC, IT Solutions President: Tom King, User ID=teking |
This site is owned and operated by: M715 Zone, LLC President: Jon Schmidt, User ID=brute4c |
Copyright Notice: This web site is subject to the protection of the copyright laws of the United States and other countries. Except for Personal Use Only, you may not modify, copy, distribute, transmit, display, perform, reproduce, publish, license, create derivative works from, transfer, or sell any information obtained from any part of the M715 Zone website without the prior written permission of M715 Zone, LLC. Written permission can only be obtained by contacting brute4c@m715zone.com |