Fuel filler hose, NOS or repro

[jeepdan]

How well are the new manufactured fuel filler hoses that Memphis Equipment sell holding up?

[Flingarrows]

I had mine for a year, but most of it garage time. It is thick, and the rubber feels fresh and not brittle.

[antonio]

http://www.ebay.com/itm/Fuel-Tank-fi...b2b68e&vxp=mtr

[spgirard30]

mine has been on my truck for a few years now and always is kept outside, still looks as good as the day I put it on. I got mine from memphis

[Cornholio]

I bought a new one from Memphis as well but for some reason it is chalking up at the bend on the exterior side. I tried a little armour all but it didn't remove the white discolouration. I might try another rubber cleaner/restorer at some point to see if it makes a difference.

[jeepdan]

Thanks guys. I'm asking because, I had very poor luck with most of the repro rubber parts that I used on my Army CJ-3B restoration.
They fell apart in a very short time, so I sought out NOS parts and replaced them all.
But a hose subjected to fuel vapors, I would prefer something with fresh new rubber if it is good quality.

[randyscycle]

The filler hoses that Memphis has are new manufacture, not NOS.

Mine has been on my truck since 2007 and it looks as good as the day I put it on there, and that with ethanol pump gas.