Results 1 to 5 of 5

Thread: T98 Input

  1. #1

    Default Do you know why I am laughing at everyone on this board?!?!

    What is the length on these? 10.25"? Tried to search but couldn't find it.

    Thanks.

  2. #2
    Join Date
    Mar 2004
    Location
    northern Arizona
    Posts
    1,025

    Default

    It varies Hetzer. Mine is a 7.5" outside, others vary depending on original application. To get mine to mate to a Jeep 360, I'm told by Advance Adapters that I need to change to a 6.5" (I think, can't find my notes right now). Anyway, you may have to change that shaft depending on the motor that you going to use. Advance has the details, and there is another shop, www.mantrans.com that carries the parts, but doesn't know the lengths. So, I would get the length from Advance and then comparison-shop.

    Rich
    67 M725 67 M715 68 M715

  3. #3
    Join Date
    Mar 2004
    Location
    northern Arizona
    Posts
    1,025

    Default

    OK, found my notes, the overall length of the T98 shaft is usually 13". In order to use my Jeep 360, I need a stick-out length of 6.5". I don't know what you will need based on whatever motor you use. I talked to Gino at Advance Adapters - 800-350-2223.

    Rich
    67 M725 67 M715 68 M715

  4. #4

    Default

    Hey thanks Rich, that answers my question. I've got a AC Delco reman Ford 5.0 sitting at work and am contemplating transmissions. Not sure when I'll get around to it at this point. Lots of things to think over.

  5. #5
    Join Date
    Dec 2003
    Location
    Lone Pine, CA
    Posts
    451

    Default 1bbl intake

    Go with the T-18. Direct bolt up and easy swap.

    Chris

Similar Threads

  1. Another M715 is reborn, need your input.
    By breadfan498 in forum Open Discussion
    Replies: 13
    Last Post: December 19th, 2008, 12:23 AM
  2. Need input, CUCV axle question
    By ChalkOutline in forum Open Discussion
    Replies: 9
    Last Post: October 2nd, 2008, 11:43 PM
  3. Feasiblity Input/Discussion
    By Roy in forum Modified Tech
    Replies: 22
    Last Post: April 7th, 2008, 07:07 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Site Upgrade, Design Modifications & Administrative Support by:
Palm River Enterprises LLC, IT Solutions
President: Tom King, User ID=teking
This site is owned and operated by:
M715 Zone, LLC
President: Jon Schmidt, User ID=brute4c


If you have any suggestions, comments, problems or questions, contact:  brute4c@m715zone.com
Use of this site means you understand and agree to our TERMS OF USE

Copyright Notice:
This web site is subject to the protection of the copyright laws of the United States and other countries. Except for Personal Use Only, you may not modify, copy, distribute, transmit, display, perform, reproduce, publish, license, create derivative works from, transfer, or sell any information obtained from any part of the M715 Zone website without the prior written permission of M715 Zone, LLC. Written permission can only be obtained by contacting brute4c@m715zone.com

Copyright 1998-2022