Page 3 of 4 FirstFirst 1234 LastLast
Results 21 to 30 of 40

Thread: Selectro Hub Install

  1. #21
    Join Date
    Sep 2008
    Location
    Stevens Pointski, Wisconsin
    Posts
    1,350

    Default

    Here's the photo of the hubs installed with the studs. Not too user-friendly.

    [IMG][/IMG]

    Scott

  2. #22

    Default

    When I did mine I replaced all the studs with a shorter version. Much more driver-friendly.

  3. #23
    Join Date
    Oct 2006
    Location
    Port Orchard, Wash.
    Posts
    4,572

    Default

    Sawzall.
    -- Tim Taylor


  4. #24
    Join Date
    Mar 2010
    Location
    Charlottesville VA
    Posts
    100

    Default

    Where do you find selectro hubs? It would be nice since my rig will be on-road more than off.
    1-1AD 4-17 INF B Co OEF 12-13

  5. #25
    Join Date
    Sep 2014
    Location
    Southern New Hampshire
    Posts
    242

    Default

    you can find them almost anywhere, Can't remember the part number, but a Google search should bring up multiple sites you can buy them from.

    typical price range is $275-325, sometimes you can find cheaper

    O.K part number was on first page, P/N 11035-01, also put here for those who get temporary blindness when reading all the previous posts
    Last edited by 67smith; March 18th, 2015 at 07:48 AM. Reason: add Part number

  6. #26
    Join Date
    Sep 1998
    Location
    North Central Wisconsin
    Posts
    11,380

    Default

    I could have sworn I typed a long reply to this...somehow it is gone...

    BigWheelBob, one of our members sold them last I heard for less than anyone else, $250 including shipping...he listed this phone number to contact him about Selectros:
    910-326-2881


    If that doesnt work, these are the cheapest I found online:
    http://truckandwinch.com/mile-marker...cking-hub.html
    Lord send your Holy Ghost into our hearts and make the desire of our hearts Your Will.

    Pro-choice, that's a LIE, babies don't choose to die!!

  7. #27

    Default

    I've seen them on Ebay for around $275-295. Planning on getting some in spring 2016, one of many 'to do' items.

  8. #28

    Default

    I put selectro hubs on my 715 and i immediately broke them. I made a machined socket that fit over the outer hub so i wouldnt have any trouble grabbing and turning the hub. mind you i did not shorten the stock studs. well the socket tool works great but it broke the stock plastic cam inside the hub because it spun the cam because the PLASTIC cam is barely retained by the 3 screws that hold it inside. so I took them apart and made cnc machined metal cams. and I remade the screw studs that hold the cam. I also remade the screw studs that hold the hand hub onto the base plate. the 3 studs just engage the groove in the base plate. they were super sloppy in the groove so i made them tighter fit in the groove. with the new metal cams. new retaining screws and the hand tool socket I can crank the hub lock to unlock with very positive action and no slop, and no fear of breaking anything. it was a bit of work but worth it. Ill try and get some pics.

  9. #29

    Default remake the guts for a selectro hub

    I have a set on my 715.The reworking of yours sounds awesome to a person who can barely sharpen a pencil.While you were doing all of this work did you come up with a cost if maybe you though of offering your redone parts to other Selectro owners. Maybe without the socket? Just asking

  10. #30

    Default

    Quote Originally Posted by 68bluegreen View Post
    I have a set on my 715.The reworking of yours sounds awesome to a person who can barely sharpen a pencil.While you were doing all of this work did you come up with a cost if maybe you though of offering your redone parts to other Selectro owners. Maybe without the socket? Just asking
    I thought of it. im a machinist and I was working at a shop where i had free reign over the machines there in my off time so i was doing this for free for my self. its possible i could produce just the cam and pins but i would need a shop that could do 4 axis milling for me to make any more of them. I still have the cad model of the cam i made. the pins were specific because i remachined and tapped the hand hub for them. they were larger overall with larger threads into the hand hub and all.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Site Upgrade, Design Modifications & Administrative Support by:
Palm River Enterprises LLC, IT Solutions
President: Tom King, User ID=teking
This site is owned and operated by:
M715 Zone, LLC
President: Jon Schmidt, User ID=brute4c


If you have any suggestions, comments, problems or questions, contact:  brute4c@m715zone.com
Use of this site means you understand and agree to our TERMS OF USE

Copyright Notice:
This web site is subject to the protection of the copyright laws of the United States and other countries. Except for Personal Use Only, you may not modify, copy, distribute, transmit, display, perform, reproduce, publish, license, create derivative works from, transfer, or sell any information obtained from any part of the M715 Zone website without the prior written permission of M715 Zone, LLC. Written permission can only be obtained by contacting brute4c@m715zone.com

Copyright 1998-2022