Results 1 to 5 of 5

Thread: Stock Distributor Upgrade

  1. #1

    Default

    Hey guys for Only 516.72/pc +S&H you can get Prestolite part number
    65-139 from Bright Components what a deal.... No seriously I called up the Prestolite tech line, well after dialing four phone numbers because Prestolite sold the distributor half to a company called Ametek so I ended up in talking to their tech service. I spoke with a man who was there with the original Prestolite and he said that they discontinued making the waterproof distributors back in 84 and the Prestolite distributor division was sold 5 years ago. He pretty much told me that their is no more Prestolite Distributor division due to the new distributor less ignition systems out there. I called him because I was wondering if the military distributor had any common civliaian parts so I could convert over to an electronic ignition using a Pertronix kit. He then told me about Prestolite part number 65-139 which was a conversion kit. He said that the military never picked up on it, at least not in large quanities. Thats when I searche for the Prestolite part number on the net and found the kit for only $ 516. I think they make new versions of the kit. Owell, another day in the life of a M715 owner......

  2. #2

    Default

    sorry to say this but i just found one from auto shack for $37.00. It's for a 65 j truck with a 230 1 b eng.

  3. #3

    Default

    Ah but will that one work with the sock military waterproof distributor? If so then I'm interested

  4. #4

    Default

    not sure about water proof. But before I'd spend $500 i'd ask our fellow m715er's if they have a line on a good used one. Many folks have put in new engs in there truck and no longer need them. bcw1284 is parting out 2 trucks now he may have one. If your going 12v the one from auto zone should work. Ill be getting one tommorrow. I'll let you know how it works.

  5. #5

    Default

    The military had two elctronic ignition replacement kits...Used mostly in the M151s as by the time they came out those were the only gas engine trucks they had...any way one was made by prestolite the other by swiss controlls. The swiss controlls one was a drop in and fo gedda boud id system... The prestolite was a PITA! You had to adjust a gap and change the shaft that the rotor sat on. A real pain...the only good thing was that it used the standard GI rotor and cap.
    Zone holster maker

Similar Threads

  1. speedometer upgrade
    By phoenix in forum Modified Tech
    Replies: 1
    Last Post: June 6th, 2009, 10:44 AM
  2. Distributor upgrade for 230
    By compexp in forum Modified Tech
    Replies: 0
    Last Post: February 10th, 2008, 08:00 PM
  3. Points and Condenser for Stock Distributor
    By rboltz in forum Stock Tech
    Replies: 1
    Last Post: December 22nd, 2007, 08:01 PM
  4. PS Upgrade from Wagoneers
    By Fastfrankie in forum Modified Tech
    Replies: 11
    Last Post: February 23rd, 2007, 01:35 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Site Upgrade, Design Modifications & Administrative Support by:
Palm River Enterprises LLC, IT Solutions
President: Tom King, User ID=teking
This site is owned and operated by:
M715 Zone, LLC
President: Jon Schmidt, User ID=brute4c


If you have any suggestions, comments, problems or questions, contact:  brute4c@m715zone.com
Use of this site means you understand and agree to our TERMS OF USE

Copyright Notice:
This web site is subject to the protection of the copyright laws of the United States and other countries. Except for Personal Use Only, you may not modify, copy, distribute, transmit, display, perform, reproduce, publish, license, create derivative works from, transfer, or sell any information obtained from any part of the M715 Zone website without the prior written permission of M715 Zone, LLC. Written permission can only be obtained by contacting brute4c@m715zone.com

Copyright 1998-2022