Page 2 of 2 FirstFirst 12
Results 11 to 15 of 15

Thread: My home made welder works

  1. #11
    Join Date
    Aug 2007
    Location
    central central wisconsin
    Posts
    289

    Default

    Actually, that would only happen if you still had the internal regulator since it samples its output voltage to see what it needs to do to change the output. With no regulator, once the 12 volts is cut to the field, it is dead. there are no wires feeding the field besides your 12 volts from the ON switch. The field coil is nothing more than an electro magnet turning inside a three phase coil of wires. once the electro magnet is shut off, there is no more magnet to make power. The field requires about 10 amps to run, so I doubt there would be enough residual magnetism to really make any power. I guess it is possible though. I guess I could try to put a volt meter on the alt and turn the field power off and keep the engine running. that would be the way to test it out.

  2. #12
    Join Date
    Feb 2009
    Location
    Northern California
    Posts
    467

    Default

    There's a slight amount of residual magnetism, but it's insignificant for most purposes. On some alternators the slight current it makes is used to tell the regulator to switch on.

    --Randy

  3. #13
    Join Date
    Jul 2007
    Location
    Rhoadesville, Virginia (five miles from no place)
    Posts
    5,125

    Default

    I gotcha'! Makes sense in a stock application, but a modified alternator wouldn't have that same setup.

    Good to know.
    "Free advice is worth what you pay for it."™

  4. #14
    Join Date
    Aug 2007
    Location
    central central wisconsin
    Posts
    289

    Default

    Just to finish this project, I thought I would provide my own schematic. Make sure that the power going to the fuse to run the control box is powered by switched power from ignition. It needs 10 amps. I had mine coming from the battery directly and already forgot and left it on once when I shut off the engine and was done welding.


  5. #15
    Join Date
    Apr 2011
    Location
    Cincinnati Ohio
    Posts
    10

    Default

    Hello. I would like permission to post this thread to my advanced electrical class.( Cincinnati State Community and Technical College ) This is a great application to all the theory we're learning. Ohms law at work!

    I would also love to see detailed plans and how you installed the second alternator so I can try and re-create it on my 715

    Mike

Similar Threads

  1. Made it Home
    By Pineyguy in forum Open Discussion
    Replies: 8
    Last Post: January 14th, 2008, 01:37 PM
  2. Home made trans adapter
    By wrecker in forum Modified Tech
    Replies: 17
    Last Post: October 2nd, 2007, 10:33 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Site Upgrade, Design Modifications & Administrative Support by:
Palm River Enterprises LLC, IT Solutions
President: Tom King, User ID=teking
This site is owned and operated by:
M715 Zone, LLC
President: Jon Schmidt, User ID=brute4c


If you have any suggestions, comments, problems or questions, contact:  brute4c@m715zone.com
Use of this site means you understand and agree to our TERMS OF USE

Copyright Notice:
This web site is subject to the protection of the copyright laws of the United States and other countries. Except for Personal Use Only, you may not modify, copy, distribute, transmit, display, perform, reproduce, publish, license, create derivative works from, transfer, or sell any information obtained from any part of the M715 Zone website without the prior written permission of M715 Zone, LLC. Written permission can only be obtained by contacting brute4c@m715zone.com

Copyright 1998-2024