Results 1 to 10 of 21

Thread: heater control cables and switch question

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1

    Default heater control cables and switch question

    I am getting ready to install my heater that I got from a FSJ, will need the control cables, can anyone tell me if the stock cables were labeled? (defrost, heat etc?) or were they just plain cables, and does anyone have a source for them?

    Thanks

    Duane

    also was there just a one speed toggle for the fan or was there speeds?

  2. #2
    Join Date
    Sep 1998
    Location
    North Central Wisconsin
    Posts
    11,520

    Default

    Fan is on or off...

    The cables are marked:

    Heat
    Defrost
    Fresh Air Control

    The knobs are, basically, OD Green.

    The cables are standard choke tye universal cables EXCEPT for the knobs being green and labeled and the ends of them are bent around in a circle or 2 instead of being just a straight end of inner cable sticking out of the outer sheath.

    If you want a pic or lengths, let me know.
    Lord send your Holy Ghost into our hearts and make the desire of our hearts Your Will.

    Pro-choice, that's a LIE, babies don't choose to die!!

  3. #3

    Default

    Are you askinga bout stock civilian parts?

    If so, there are no cables (except the blend cable that opens the main door to the heator core housing). The defrost, off and air(heat) settings are controlled by vacuum.

    The civilian heater fan has three speeds.
    1963 J300/1971 J2000/1983 J10

  4. #4
    Join Date
    Sep 1998
    Location
    North Central Wisconsin
    Posts
    11,520

    Default

    Being this is the stock tech board, it would be stock to the M715...if posted in the correct forum...
    Lord send your Holy Ghost into our hearts and make the desire of our hearts Your Will.

    Pro-choice, that's a LIE, babies don't choose to die!!

  5. #5
    Join Date
    Jul 2009
    Location
    Louisville, KY
    Posts
    1,041

    Default

    Can a vacuum newer heater be adapted to the use of control cables?
    Thanks for all the help!

  6. #6

    Default

    Most likely the civ. vac controlled ones just had a vac. daspot added that connected to the same post the cables did(?), you would need a way to attach and secure the cable there in place of the daspot. The early civ. vehs. did use a control panel which just bolted to the bottom of the dash you could use that and run a vac line off your wipers and have the system oper. w/ vac I would think, but I hadnt ried that.
    68 M-715 MVPA #2710

  7. #7

    Default

    Quote Originally Posted by brute4c View Post
    Being this is the stock tech board, it would be stock to the M715...if posted in the correct forum...
    Just wanted to make sure, as he said he is using a civilian heater. That could mean he has the entire set up.
    1963 J300/1971 J2000/1983 J10

  8. #8

    Default

    I bought a heater setup out of a fsj, and trying to install in my 715 as it would have came stock, thats why I am intrested in the correct cables, I am going to use the toggle for the fan like a stock one.if anyone has a source for the cables with the print on them I would appreciate it.

    Thanls

    Duane

Similar Threads

  1. m-725 heater conversion question 24 to 12
    By KYSAR725 in forum Modified Tech
    Replies: 6
    Last Post: February 17th, 2010, 07:00 PM
  2. Hot Water Heater Installation Question
    By BlessedM715 in forum Stock Tech
    Replies: 6
    Last Post: January 15th, 2010, 10:37 PM
  3. osut362 : heater/defroster cables
    By PseudoZone in forum PseudoZone - Open Archive
    Replies: 8
    Last Post: November 13th, 2009, 01:55 PM
  4. barrman : Heater Fan Switch
    By Barrman in forum PseudoZone - Open Archive
    Replies: 2
    Last Post: November 12th, 2009, 01:46 AM
  5. heater question, what fits?
    By Duane in forum Stock Tech
    Replies: 35
    Last Post: January 21st, 2009, 01:41 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Site Upgrade, Design Modifications & Administrative Support by:
Palm River Enterprises LLC, IT Solutions
President: Tom King, User ID=teking
This site is owned and operated by:
M715 Zone, LLC
President: Jon Schmidt, User ID=brute4c


If you have any suggestions, comments, problems or questions, contact:  brute4c@m715zone.com
Use of this site means you understand and agree to our TERMS OF USE

Copyright Notice:
This web site is subject to the protection of the copyright laws of the United States and other countries. Except for Personal Use Only, you may not modify, copy, distribute, transmit, display, perform, reproduce, publish, license, create derivative works from, transfer, or sell any information obtained from any part of the M715 Zone website without the prior written permission of M715 Zone, LLC. Written permission can only be obtained by contacting brute4c@m715zone.com

Copyright 1998-2024