Results 1 to 3 of 3

Thread: caster angle

  1. January 2nd, 2010, 10:42 PM #1
    chadriley5's Avatar
    chadriley5
    chadriley5 is offline Basic Trainee
    Join Date
    Feb 2009
    Location
    hueytown al
    Posts
    36

    Default caster angle

    i did a spring over on my m715 and i forgot to check caster angle before i took it apart.does anyone know what the caster settings are for the m715.i left the stock spring perch on the axle.could i put it at zero and the settings be the same that they were
    Reply With Quote Reply With Quote
  2. January 3rd, 2010, 07:57 PM #2
    Panther's Avatar
    Panther
    Panther is offline Private 1st Class
    Join Date
    Oct 2009
    Location
    Methuen, MA
    Posts
    323

    Default

    Just checked it and it came out to 8 degrees
    Reply With Quote Reply With Quote
  3. January 3rd, 2010, 09:48 PM #3
    chadriley5's Avatar
    chadriley5
    chadriley5 is offline Basic Trainee
    Join Date
    Feb 2009
    Location
    hueytown al
    Posts
    36

    Default

    where did you check it and how? i have a caster camber gauge that we use for our oval track car i ll have to check and see if i can put it on the hub or not thanks for the info
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. engine angle
    By jpsnblood in forum Modified Tech
    Replies: 1
    Last Post: December 9th, 2009, 02:29 PM
  2. stock pinion angle
    By talulah in forum Stock Tech
    Replies: 0
    Last Post: April 17th, 2007, 05:01 AM
  3. Stub shaft angle questions
    By saxon in forum Open Discussion
    Replies: 28
    Last Post: January 29th, 2007, 09:56 AM
  4. angle braces under radiator
    By Swampthang in forum Modified Tech Archives
    Replies: 5
    Last Post: February 1st, 2004, 02:48 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules



Site Upgrade, Design Modifications & Administrative Support by:
Palm River Enterprises LLC, IT Solutions
President: Tom King, User ID=teking 		This site is owned and operated by:
M715 Zone, LLC
President: Jon Schmidt, User ID=brute4c


If you have any suggestions, comments, problems or questions, contact:  brute4c@m715zone.com
Use of this site means you understand and agree to our TERMS OF USE

Copyright Notice:
This web site is subject to the protection of the copyright laws of the United States and other countries. Except for Personal Use Only, you may not modify, copy, distribute, transmit, display, perform, reproduce, publish, license, create derivative works from, transfer, or sell any information obtained from any part of the M715 Zone website without the prior written permission of M715 Zone, LLC. Written permission can only be obtained by contacting brute4c@m715zone.com

Copyright 1998-2024