Re: Radiator in the bed ??
Post by barrman on Nov 2, 2006, 9:59am
Here is the best picture I have of the fan here at work. It was taken over a year ago, but you get the idea.
![]()
Re: Radiator in the bed ??
Post by barrman on Nov 2, 2006, 9:59am
Here is the best picture I have of the fan here at work. It was taken over a year ago, but you get the idea.
![]()
Re: Radiator in the bed ??
Post by barrman on Nov 2, 2006, 10:00am
I still have enough room in front of the fan to use a short socket and a 3/8" ratchet drive to install the bolts.
Re: Radiator in the bed ??
Post by elohim1 on Nov 2, 2006, 6:52pm
Quote:
I've got a 454 and a tilt front- I fit a stock Ron Davis dual pass rad. with two puller fans- fabbed a custom mount. Pass. fan motor misses alt. by about 1/4 inch. Works great though. Gimme your e-mail and I'll sent pix if it helps. Won't be till next week though, I'm headed to Mex this weekend
Yes, please send pics of this tilt setup to : elohimfirst@msn.com
Thanks
Chris
Good info. gents.
Re: Radiator in the bed ??
Post by 40grit on Nov 2, 2006, 8:27pm
sorry boss, got so friggen busy with DieHard4 filming today...I'm going in tomorrow to work on 715, i'll get them tomorrow...
Re: Radiator in the bed ??
Post by 40grit on Nov 3, 2006, 4:53pm
ok, here's a bunch...
front view, ground level
[img=http://img292.imageshack.us/img292/5607/coresupport002qc6.th.jpg]
top view
[img=http://img126.imageshack.us/img126/7586/coresupport003ty0.th.jpg]
passenger side rear view
[img=http://img293.imageshack.us/img293/4955/coresupport004ht4.th.jpg]
driver side rear view
[img=http://img527.imageshack.us/img527/4599/coresupport005aw2.th.jpg]
yet another view
[img=http://img170.imageshack.us/img170/7326/coresupport006el6.th.jpg]
radiator I'm using, with Flexilite 292 monster fans ( 31x19 universal Gm rad)
[img=http://img527.imageshack.us/img527/2104/coresupportsc1.th.jpg]
no put together pics, but the rad fits in front, about 3" further forward than stock with the fans behind it...leaves about 1" to front of water pump serp pulley...still has room for auto tranny cooler in front if I decided to change down the road...
supports are made of steel framing member, cost $11 for 10' section, cut a few pieces out, bent some in half lengthwise and used them for front supports, with a thin strip of rubber, it fits perfect around tanks on radiator, just need to fab top and bottom brackets, and drill holes for fans to mount...
Re: Radiator in the bed ??
Post by elohim1 on Nov 3, 2006, 9:29pm
Much appreciated 40grit !!!
Site Upgrade, Design Modifications & Administrative Support by: Palm River Enterprises LLC, IT Solutions President: Tom King, User ID=teking |
This site is owned and operated by: M715 Zone, LLC President: Jon Schmidt, User ID=brute4c |
Copyright Notice: This web site is subject to the protection of the copyright laws of the United States and other countries. Except for Personal Use Only, you may not modify, copy, distribute, transmit, display, perform, reproduce, publish, license, create derivative works from, transfer, or sell any information obtained from any part of the M715 Zone website without the prior written permission of M715 Zone, LLC. Written permission can only be obtained by contacting brute4c@m715zone.com |
![]() |