Copyright Notice:
This web site is subject to the protection of the copyright laws of the United States and other countries. Except for Personal Use Only, you may not modify, copy, distribute, transmit, display, perform, reproduce, publish, license, create derivative works from, transfer, or sell any information obtained from any part of the M715 Zone website without the prior written permission of M715 Zone, LLC. Written permission can only be obtained by contacting brute4c@m715zone.com
|
fisherman : Np 200 ebrake mounting on to np 202
The first picture of 202 output bearing. Notice how it protrudes out from the case almost 3/16". The 200 output ebrake flange must clear this
This is the adapter I made to clear the bearing with the 200 ebrake flange..
You can see the adapter is the same as the aluminum housing that came off of the 202, has the bearing and retainer clearance machined into it.
The drum mounted up and plenty of clearance for the washer, nut and cotter pin. Adapter made for the centered rear output shaft. Great job Brandon, thanks again. Finished with ujoint flange mounted. Now for new bearings and seals. I will shoot more pictures as the mock up and frame mounting come together. Fisherman
