koobster : head bolts

[PseudoZone]

head bolts
Post by koobster on Sept 30, 2006, 4:23pm

What is the touque on the head bolts. I need this info now. getting ready to put it back on.

[hiker]

Re: head bolts
Post by hiker on Sept 30, 2006, 7:59pm

(7) Install the cylinder head bolts in all but the guide pin locations with proper washers and tighten them down snugly in the sequence indicated in figure 3-51.
Remove the two guide pins and install two zinc plated cylinder head bolts and washers in their place. In the sequence given, torque all head bolts 80 to 95 lbs-ft, using thin wall socket 34244-2.

(118 of 357) TM 9-2320-244-34 Manual