NP200 NAPA part #'s

[CrashMorriss]

Looks like i'm not having luck finding the parts numbers for a NP200 Rebuild.
I know this has been done on here before but for some reason a can't find it.

You know, I need part #'s for =Seals
Bearings
Gaskets
New Nuts
Torque spec's
Proper setup spec's


point me in the right direction guys.

Thanks

[brute4c]

Specs are in the -34 manual...you can download it from the Online Manuals link at the top of the page...that manual has the entire rebuild procedures in it.

This page from the Online Manuals section has a lot of the part numbers:

http://www.m715zone.com/vb/view.php?pg=tcase_rebuild

[wolf.dose]

The bearings hold numbers. These are standard bvearings. The cone rollers are Timken bearings. Go to the bearing shop arround the corner and order then. Do nor forget to bring the inner and the outer part!
The seals should be standard CR parts, refer to the numbers. The paper seals you can make yourself for example with ABIL paper or simelar.
Wolf from Germany
28 Years with a M715

[CrashMorriss]

Got it Thanks