Rifle mount.

[Beltfed Only]

Anyone have a picture of an M14 in the behind the seat rifle mount, mine does not want to fit.

[Beast]

I'm not possitive because I don't have the gun mount in the stock location any more due to moving the drivers seat farther back. But I believe that for a M14 to fit in, it has to be positioned with the mag well facing in towards the battery box. The stock may not fit totally flat in the base, but as long as you can position it where the rifle is mainly flat against the upper mount it should hold fine.

Dave
1967 Kaiser Jeep M715 weapons carrier:http://www.davidallenracing.com/M715.htm
1967 Kaiser Jeep M35a2 2.5 ton cargo truck: http://www.davidallenracing.com/M35A2.htm
1968 M51 Inflatable Chemical Shelter System http://www.davidallenracing.com/M51.htm
1953 Dodge M37 weapons carrier http://www.davidallenracing.com/M37.htm
Delta Team Decals: http://www.i2k.com/~schwarzd/

[Kaiserjeeps]

I have one at home. I can look tonight and see if I can find it. It fit with no problems.

[brute4c]

I have a pic Kaiserjeeps posted a long time back with a M1 Garand in the holder...does that help?

[oilcan]

I just took some pics in the dark. Give me a few minuites to clean them up.

[oilcan]

It fits fine.

[Beltfed Only]

Thanks guys, I'll try it again.

[airborne]

Anyone with a pic of a dash mount on the pass side?

[chicklin]

What happened to this Garand? It's been mutilated ......oops, that's an M14. I was thinking someone posted the pic of the aforementioned Garand.

It fits fine.

[brute4c]

Garand: